[softwarelist] Re: Sprinter
- From: Phil <philco@xxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Mon, 19 Nov 2007 14:03:12 +0000 (GMT)
On 19 Nov, Ian Hamilton <Ian.Hamilton@xxxxxxxx> wrote:
> In article <4f44160a4aphilco@xxxxxxxxxxx>, Phil <philco@xxxxxxxxxxx>
> wrote:
> > I have not used Sprinter and now I have tried it, I think I should
> > have a long time ago, having had it on the computer for a long I'd
> > forgotten what it actually did, much to my shame.
> [Snip]
> > Running RO4.39, !Printers+ 1.91a.
> > Ive installed Sprinter following the instructions, placing PDumperSP
> > in the PDumpers directory and installing the definition file SPrinter
> > into !Printers and setting the connection and config etc then saving.
> > Running Sprinter works fine. However, when I come to restart the
> > machine, I get an Error at class dp message, clicking ok continues
> > the boot up and !Printers installs ok, but the Sprinter icon is a
> > default printer icon. Running Sprinter and selecting Sprinter as the
> > output works ok though.
> [Snip]
> Most likely there is a misalignment between the setup files in the
> Printers Choices directory (I think Printers+ uses Printers2 so you
> need to look at !Boot.Choices.Printers2). My advice is to move this
> directory elsewhere and setup all your printers from scratch. Hopefully
> it will then work correctly.
> Ian
Thanks Ian, that will be my task for this evening..
Regards
Phil
--
philco@xxxxxxxxxxx
Other related posts:
