[softwarelist] Re: Sprinter

  • From: Phil <philco@xxxxxxxxxxx>
  • To: OVLIST <davidpilling@xxxxxxxxxxxxx>
  • Date: Wed, 21 Nov 2007 08:14:22 +0000 (GMT)

On 19 Nov, philco@xxxxxxxxxxx wrote:
> On 19 Nov, Ian Hamilton <Ian.Hamilton@xxxxxxxx> wrote:
> > In article <4f44160a4aphilco@xxxxxxxxxxx>, Phil <philco@xxxxxxxxxxx>
> > wrote:
> > > I have not used Sprinter and now I have tried it, I think I should
> > > have a long time ago, having had it on the computer for a long I'd
> > > forgotten what it actually did, much to my shame. 

> > [Snip]

> > > Running RO4.39, !Printers+ 1.91a.

> > > Ive installed Sprinter following the instructions, placing
> > > PDumperSP in the PDumpers directory and installing the definition
> > > file SPrinter into !Printers and setting the connection and config
> > > etc then saving. Running Sprinter works fine. However, when I come
> > > to restart the machine, I get an Error at class dp message,
> > > clicking ok continues the boot up and !Printers installs ok, but
> > > the Sprinter icon is a default printer icon. Running Sprinter and
> > > selecting Sprinter as the output works ok though.

> > [Snip]

> > Most likely there is a misalignment between the setup files in the
> > Printers Choices directory (I think Printers+ uses Printers2 so you
> > need to look at !Boot.Choices.Printers2). My advice is to move this
> > directory elsewhere and setup all your printers from scratch.
> > Hopefully it will then work correctly.

> > Ian

> Just tried reinstalling printers from scratch and I still get the error
> box. Printers consists of UNIPRINT (to a HP2355), Arcfax, Sprinter.
> Loaded in various orders too. Defualt printer is Uniprint.


> Thanks

> Phil

A suggestion from Ian was to change the order in which !Printers and
!Sprinter loads, making sure !Sprinter loads first. That cured it.


Thanks again Ian, and David for the application upgrade too.. 


Phil

-- 



philco@xxxxxxxxxxx

Other related posts: