I digitized a hat logo that is just text. I'm sewing a Flex Fit Structured hat with 75/11 sharp needles. The stitch length is about 1/4" along the top of the hat (text is 2" tall and hooped as close to the bottom as possible). I keep getting needle breaks on the top of the design. Raised needle plate is in and pressure foot is adjusted 2.5 clicks from top. No backing. Material thickness is 13. I did get a break on the fill outline under the text but I suspect the needle was already bent from the longer stitches on the text. I am going to try it on the other machine tonight to see if I still get breaks unless anyone can tell if I'm doing something wrong. Thanks, Mike