[amayausers] Re: Lettering
- From: "Wolf Embroidery" <wolfemb@xxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 15 Mar 2006 15:09:24 -0500
A lot of my business is T's so I'll try to make it work. I'm using two
layers of tear away to make it more comfortable to wear. It looks pretty
good a little pucker but not bad. the customer was warned that it might be
an issue and signed off it.
Thanks for all the advice.
Lisa
Wolf Embroidery
Wolfemb@xxxxxxxx
Lisa and Don Ridley
----- Original Message -----
From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, March 15, 2006 2:44 PM
Subject: [amayausers] Re: Lettering
> Your problem is that the strap shirts are nothing more than teeshirt
> material with straps...the worst stuff to embroider on! I think the
> consensus for doing teeshirts was double 3 oz. backing, back a month
> or two here?
> Maybe a couple layers of tearaway might work.
> Tighten the bobbin and chances are good you are going to get a pucker...
> I think someone else mentioned they were having good luck with the
> poly 'mesh' backing for teeshirts but I haven't tried it yet.
> We just don't bother sew on teeshirts or material similar....shirts
> are cheaper than the embroidery will cost them!
> Roland
>
> Sunrise Graphics
> 116 Main St
> Claremont, NH 03743
> 603-543-1324
> fax 603-543-9902
> www.sunrisegraphics.org
> signman@xxxxxxxxxxxxxxxxxxx
>
>
> On Mar 15, 2006, at 2:00 PM, Wolf Embroidery wrote:
>
>> Good Afternoon!
>>
>> I'm in the process of doing up an order of Thin Spaghetti strap
>> shirts. I
>> have played around with several fonts and settings as well as with the
>> backing and material thickness and the result is always the same. The
>> lettering is to be red and the white bobbin keeps pulling through and
>> showing.
>>
>> Any suggestions?
>> Wolf Embroidery
>> Wolfemb@xxxxxxxx
>> Lisa and Don Ridley
>>
>>
>>
>>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.2.3/281 - Release Date: 3/14/2006
>
>
Other related posts:
