Thank you, I will give it a shot when I get home... :o) ________________________________ From: torontocbm-bounce@xxxxxxxxxxxxx <torontocbm-bounce@xxxxxxxxxxxxx> To: torontocbm@xxxxxxxxxxxxx <torontocbm@xxxxxxxxxxxxx> Sent: Fri May 22 16:15:20 2009 Subject: [torontocbm] Re: does any one know what the correct syntax for opening a .d64 image is on sd2iec? Hi Walter, Your example is missing three characters. Your Line Is ; OPEN1,8,15":MSPACMAN.D64":CLOSE1 Try; OPEN1,8,15,"CD:MSPACMAN.D64":CLOSE1 ,"CD <--- Missing Part After the secondary address in all open statements there must be a , (i.e. 15,"). Also the first thing inside the quoate marks is the function code ( "i.e. CD: filename.d64" ). As for the flashing LEDs Jim Bain will have to answer that, Sorry. Tom --- On Fri, 5/22/09, Miraglia, Walter <Walter.Miraglia@xxxxxxxxxxx> wrote: From: Miraglia, Walter <Walter.Miraglia@xxxxxxxxxxx> Subject: [torontocbm] Re: does any one know what the correct syntax for opening a .d64 image is on sd2iec? To: "torontocbm@xxxxxxxxxxxxx" <torontocbm@xxxxxxxxxxxxx> Received: Friday, May 22, 2009, 7:47 PM Yup I saw that, but had trouble with it... So I was looking for a straight forward example Using the example of MSPACMAN.D64... So ? would it be: OPEN1,8,15":MSPACMAN.D64":CLOSE1 If so I tried that and got a syntax error...tried many... :) Any time I used OPEN I got a syntax error, which is why I was asking, I'm also trying to determine if I have an issue with my sd2iec... So if anyone can provide an example of what I am to type, it would be very very helpful... Cheers and thanks for the link Golan, :) -----Original Message----- From: torontocbm-bounce@xxxxxxxxxxxxx<http://ca.mc880.mail.yahoo.com/mc/compose?to=torontocbm-bounce@xxxxxxxxxxxxx> [mailto:torontocbm-bounce@xxxxxxxxxxxxx<http://ca.mc880.mail.yahoo.com/mc/compose?to=torontocbm-bounce@xxxxxxxxxxxxx>] On Behalf Of Golan Klinger Sent: Friday, May 22, 2009 3:31 PM To: torontocbm@xxxxxxxxxxxxx<http://ca.mc880.mail.yahoo.com/mc/compose?to=torontocbm@xxxxxxxxxxxxx> Subject: [torontocbm] Re: does any one know what the correct syntax for opening a .d64 image is on sd2iec? Walter Miraglia wrote: > For example, if I have mspacman.d64 on the root of my sd card in my > > Trusty (remains to be seen) SD2IEC what do I type to get access to it? The answer can be found in the SD2IEC entry at the C64 Wiki: http://www.c64-wiki.com/index.php/sd2iec_%28firmware%29 -- Golan Klinger <gklinger@xxxxxxxxx<http://ca.mc880.mail.yahoo.com/mc/compose?to=gklinger@xxxxxxxxx>> Dark is the suede that mows like a harvest.