[torontocbm] Re: does any one know what the correct syntax for opening a .d64 image is on sd2iec?

  • From: "Miraglia, Walter" <Walter.Miraglia@xxxxxxxxxxx>
  • To: "torontocbm@xxxxxxxxxxxxx" <torontocbm@xxxxxxxxxxxxx>
  • Date: Fri, 22 May 2009 14:53:30 -0500

I'm having an issue with my SD2IEC board,
Perhaps one of you guys have seen this...

My LED1 ( the RED one ) slowly and steadily flashes...
2 seconds on two seconds off... while the red led is on,
The unit is unavailable (device not present) however if I time
A command correctly and send it while the RED led is off, I can access the 
unit...

This is different from my syntax issue below... I'm just having one of those 
days....

So if anyone has seen this, and knows a cure? Let me know...

Cheers and thanks...
:)


-----Original Message-----
From: torontocbm-bounce@xxxxxxxxxxxxx [mailto:torontocbm-bounce@xxxxxxxxxxxxx] 
On Behalf Of Miraglia, Walter
Sent: Friday, May 22, 2009 3:47 PM
To: torontocbm@xxxxxxxxxxxxx
Subject: [torontocbm] Re: does any one know what the correct syntax for opening 
a .d64 image is on sd2iec?

Yup I saw that, but had trouble with it...
So I was looking for a straight forward example
Using the example of MSPACMAN.D64...

So ? would it be: OPEN1,8,15":MSPACMAN.D64":CLOSE1

If so I tried that and got a syntax error...tried many... :)

Any time I used OPEN I got a syntax error, which is why I was asking,
I'm also trying to determine  if I have an issue with my sd2iec...

So if anyone can provide an example of what I am to type, it would be very very 
helpful...

Cheers and thanks for the link Golan, :)



-----Original Message-----
From: torontocbm-bounce@xxxxxxxxxxxxx [mailto:torontocbm-bounce@xxxxxxxxxxxxx] 
On Behalf Of Golan Klinger
Sent: Friday, May 22, 2009 3:31 PM
To: torontocbm@xxxxxxxxxxxxx
Subject: [torontocbm] Re: does any one know what the correct syntax for opening 
a .d64 image is on sd2iec?

Walter Miraglia wrote:

> For example, if I have mspacman.d64 on the root of my sd card in my
>
> Trusty (remains to be seen) SD2IEC   what do I type to get access to it?

The answer can be found in the SD2IEC entry at the C64 Wiki:

http://www.c64-wiki.com/index.php/sd2iec_%28firmware%29

-- 
Golan Klinger <gklinger@xxxxxxxxx>
Dark is the suede that mows like a harvest.

Other related posts:

  1. Home
  2. torontocbm
  3. Archive
  4. 05-2009