These two are socketed: Character ROM (according to google search) MOS 901225-01 1982 CBM 2483AMD Kernal ROM (according to google search) MOS 901227-03 1983 CBM 0384 This one is soldered down (no socket) Basic ROM (according to google search) MOS 901226-01 1982 CBM 2482 Does this shed any light? -----Original Message----- From: torontocbm-bounce@xxxxxxxxxxxxx [mailto:torontocbm-bounce@xxxxxxxxxxxxx] On Behalf Of James Alexander Sent: Friday, May 22, 2009 10:03 PM To: torontocbm@xxxxxxxxxxxxx Subject: [torontocbm] Re: does any one know what the correct syntax for opening a .d64 image is on sd2iec? Just out of curiosity, what is the part number and date code on the kernal rom? Miraglia, Walter wrote: > Yup I figured that, > This one is white text, dark blue background, and white boarder, > And yet, the rom appears to be untouched... the basic chip is soldered down, > And the kernel, although socketed, looks to be original... :) > > A mystery... > > > -----Original Message----- > From: torontocbm-bounce@xxxxxxxxxxxxx > [mailto:torontocbm-bounce@xxxxxxxxxxxxx] On Behalf Of James Alexander > Sent: Friday, May 22, 2009 9:53 PM > To: torontocbm@xxxxxxxxxxxxx > Subject: [torontocbm] Re: does any one know what the correct syntax for > opening a .d64 image is on sd2iec? > > Hey Walter, > > An unmodified 64 will show light blue border & text with darker blue > background. > > Miraglia, Walter wrote: > >> Thank you very very much, It worked thank you.... >> >> So I get it, all the commands in the document need to be encompassed by >> >> This syntax to get the commands onto the sd2iec... card... J >> >> I'm going to build a power connector and iec connector and bypass my >> daughter card, >> >> In the even it is causing the issue with the flashing led.... >> >> Because if I press switch 2 while the red led is off, it will stay off >> and the board is accessible, >> >> Via the iec serial bus... when I release sw2, it goes back to it's >> patient 2 seconds on and 2 seconds off... >> >> One other quick question.... >> >> When I turn the C64 I just purchased from tpug, the text is white, and >> the boarder is white... >> >> The background is blue.... But the ROM chips are original.... Was this the >> standard color for a while >> >> For old bread box C64's? >> >> Cheers.... >> >> I'm gonna jiffy doss it, so not really concerned, just wondering... >> >> But it is kinda interesting... >> >> *From:* torontocbm-bounce@xxxxxxxxxxxxx >> [mailto:torontocbm-bounce@xxxxxxxxxxxxx] *On Behalf Of *Tom Luff >> *Sent:* Friday, May 22, 2009 5:15 PM >> *To:* torontocbm@xxxxxxxxxxxxx >> *Subject:* [torontocbm] Re: does any one know what the correct syntax >> for opening a .d64 image is on sd2iec? >> >> Hi Walter, >> >> Your example is missing three characters. >> >> Your Line Is ; >> >> OPEN1,8,15":MSPACMAN.D64":CLOSE1 >> >> Try; >> >> OPEN1,8,15,"CD:MSPACMAN.D64":CLOSE1 >> ,"CD <--- Missing Part >> >> After the secondary address in all open statements there must be a , >> (i.e. 15,"). >> >> Also the first thing inside the quoate marks is the function code ( >> "i.e. CD: /filename.d64/"/ /). >> >> As for the flashing LEDs Jim Bain will have to answer that, Sorry. >> >> Tom >> >> >> >> --- On *Fri, 5/22/09, Miraglia, Walter >> /<Walter.Miraglia@xxxxxxxxxxx>/* wrote: >> >> >> From: Miraglia, Walter <Walter.Miraglia@xxxxxxxxxxx> >> Subject: [torontocbm] Re: does any one know what the correct >> syntax for opening a .d64 image is on sd2iec? >> To: "torontocbm@xxxxxxxxxxxxx" <torontocbm@xxxxxxxxxxxxx> >> Received: Friday, May 22, 2009, 7:47 PM >> >> Yup I saw that, but had trouble with it... >> So I was looking for a straight forward example >> Using the example of MSPACMAN.D64... >> >> So ? would it be: OPEN1,8,15":MSPACMAN.D64":CLOSE1 >> >> If so I tried that and got a syntax error...tried many... :) >> >> Any time I used OPEN I got a syntax error, which is why I was asking, >> I'm also trying to determine if I have an issue with my sd2iec... >> >> So if anyone can provide an example of what I am to type, it would >> be very very helpful... >> >> Cheers and thanks for the link Golan, :) >> >> >> >> -----Original Message----- >> From: torontocbm-bounce@xxxxxxxxxxxxx >> >> <http://ca.mc880.mail.yahoo.com/mc/compose?to=torontocbm-bounce@xxxxxxxxxxxxx> >> [mailto:torontocbm-bounce@xxxxxxxxxxxxx >> >> <http://ca.mc880.mail.yahoo.com/mc/compose?to=torontocbm-bounce@xxxxxxxxxxxxx>] >> On Behalf Of Golan Klinger >> Sent: Friday, May 22, 2009 3:31 PM >> To: torontocbm@xxxxxxxxxxxxx >> <http://ca.mc880.mail.yahoo.com/mc/compose?to=torontocbm@xxxxxxxxxxxxx> >> Subject: [torontocbm] Re: does any one know what the correct >> syntax for opening a .d64 image is on sd2iec? >> >> Walter Miraglia wrote: >> >> > For example, if I have mspacman.d64 on the root of my sd card in my >> > >> > Trusty (remains to be seen) SD2IEC what do I type to get access >> to it? >> >> The answer can be found in the SD2IEC entry at the C64 Wiki: >> >> http://www.c64-wiki.com/index.php/sd2iec_%28firmware%29 >> >> -- >> Golan Klinger <gklinger@xxxxxxxxx >> <http://ca.mc880.mail.yahoo.com/mc/compose?to=gklinger@xxxxxxxxx>> >> Dark is the suede that mows like a harvest. >> >> > > > > >