[pure-silver] Re: counter on Nikon FG not working
- From: Speedy <speedgraphic@xxxxxxxxxxx>
- To: "pure-silver@xxxxxxxxxxxxx" <pure-silver@xxxxxxxxxxxxx>
- Date: Wed, 25 Jun 2014 18:40:27 -0400
I would suggest you contact Jon Goodman (once known on ebay as Interslice).
Jon sells some of the best light seal kits to be found anywhere...
His email address is jgood21967@xxxxxxx
Good Light!
Chuck
> Date: Wed, 25 Jun 2014 16:53:28 -0500
> From: tundra@xxxxxxxxxxxxxx
> To: pure-silver@xxxxxxxxxxxxx
> Subject: [pure-silver] Re: counter on Nikon FG not working
>
> On 06/25/2014 06:18 AM, Bob Younger wrote:
> > Tim,
> > I'm with Chuck. That was great, and well worth saving for that "someday."
> > Thanks,
> > Bob Younger
> >
>
> Thanks guys. A few other points of clarification:
>
> - The price of seals for the FG is $16 on eBay, not $10. At that point,
> it starts to become attractive to buy sheets of seal material and cut
> your own. I did this because I've been doing several cameras a year.
> You can buy a kit with multiple sheets of various thickness that you
> cut to size as needed:
>
> http://www.micro-tools.com/store/P-LB-KIT/Light-Baffle-Kit--5-Sheets.aspx
>
> Microtools is also a really good source for other camera restoration
> supplies
> and tools.
>
> - When applying the new seal you have to watch because the adhesive is very
> aggressive double-stick tape. One nice trick is to wet your finger
> slightly and use it to moisten the exposed tape face. When you lay the
> seal down, it gives you a few moments to move it around before the
> moisture is absorbed/evaporates and the seal adheres permanently.
>
>
> ----------------------------------------------------------------------------
> Tim Daneliuk tundra@xxxxxxxxxxxxxx
> PGP Key: http://www.tundraware.com/PGP/
>
> =============================================================================================================
> To unsubscribe from this list, go to www.freelists.org and logon to your
> account (the same e-mail address and password you set-up when you
> subscribed,) and unsubscribe from there.
Other related posts:
