I would look for a spike in the voltage supply to the enlarger. I don't know that a voltmeter would be fast enough to show a voltage spike.Is there anything odd with the stabilizer unit? Do you have another stabilizer to try?
...Vick J Stewart wrote:
Folks, can anyone help me troubleshoot reasons why my lamps are blowing out within a few seconds of turning on my Dichro II color head (on a D2). I'm using the standard D2 power supply with stabilizer. The stabilizer fuse is intact. The power cord is plugged into a surge protector via the timer. My house has always had a stable power supply. The bulb elements are breaking. The problem began immediately. A bulb I had been using for a couple years fractured. When I put a new one in, it burned out within seconds. I repeated this with a new bulb and the same thing happened. One bulb actually broke the reflector in the process, but I'm not sure it was caused by the same problem. I have a voltmeter to check current to the socket if you can help me understand what I might be looking for in isolating the cause. Thanks in advance. Jim
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.