The same problem here but I cannot, for anything in the world, figure this one out. I've now configured dmcfg such that the xterm is no longer using a dedicated display. How can I find out how the WYSE 5150 is identifying itself on the network? Cheers, Frits. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Mueller, Jim D. Sent: Thursday, 10 May 2007 5:41 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] WYSE 5150SE Gentlemen, =09I am setting up a WYSE 5150SE terminal to use as an xterminal. I am able to set up a display manager in the dmcfg file and connect to it without any Problem. The one strange thing that I am running into is that I cannot get the WYSE 5150 to connect to a dedicated display manager. I can use the Same configuration and open a dedicated display manager using a Exceed session. Although it does not make sense, the problem only occurs when using A WYSE 5150SE terminal. Has anyone out there run across this same problem? Thanks for your help in advance! James Mueller Senior Process Control Engineer Cliffs Michigan Mining Co. (906) 475-3534 JDMueller@xxxxxxxxxxxxxxxxxxxx ######################################################################## ####### This electronic message and any attachments included with this message are for the exclusive use of the individual or entity to which it is intended to be addressed. This message may contain information that is privileged or confidential and thereby exempt and protected from unauthorized disclosure under applicable law. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, be aware that any disclosure, dissemination, distribution or copying of this communication, or the use of its contents, is not authorized and is strictly prohibited. If you have received this communication and are not the intended recipient, please notify the sender immediately and permanently delete the original message from your e-mail system. ######################################################################## ####### =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 =0A=0ANOTICE - This message and any attached files may contain informatio= n that is confidential and intended only for use by the intended recipien= t. If you are not the intended recipient or the person responsible for de= livering the message to the intended recipient, be advised that you have = received this message in error and that any dissemination, copying or use= of this message or attachment is strictly forbidden, as is the disclosur= e of the information therein. If you have received this message in error = please notify the sender immediately and delete the message. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave