Gentlemen, I am setting up a WYSE 5150SE terminal to use as an xterminal. I am able to set up a display manager in the dmcfg file and connect to it without any Problem. The one strange thing that I am running into is that I cannot get the WYSE 5150 to connect to a dedicated display manager. I can use the Same configuration and open a dedicated display manager using a Exceed session. Although it does not make sense, the problem only occurs when using A WYSE 5150SE terminal. Has anyone out there run across this same problem? Thanks for your help in advance! James Mueller Senior Process Control Engineer Cliffs Michigan Mining Co. (906) 475-3534 JDMueller@xxxxxxxxxxxxxxxxxxxx ############################################################################### This electronic message and any attachments included with this message are for the exclusive use of the individual or entity to which it is intended to be addressed. This message may contain information that is privileged or confidential and thereby exempt and protected from unauthorized disclosure under applicable law. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, be aware that any disclosure, dissemination, distribution or copying of this communication, or the use of its contents, is not authorized and is strictly prohibited. If you have received this communication and are not the intended recipient, please notify the sender immediately and permanently delete the original message from your e-mail system. ############################################################################### _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave