Re: [foxboro] WYSE 5150SE
- From: "Schouten, Frits JF" <Frits.Schouten@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 14 May 2007 08:09:21 +1200
In my case it shows the name of the WYSE terminal C0WYS1 which is the
same as in /etc/hosts.
Cheers,
Frits.
=20
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Kevin Fitzgerrell
Sent: Friday, 11 May 2007 11:50 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WYSE 5150SE
When you use the "show DM usage" screen, what shows for the user name by
the WYSE?
Kevin FitzGerrell
On 5/11/07, Mueller, Jim D. <JDMueller@xxxxxxxxxxxxxxxxxxxx> wrote:
> I cannot speak for Frits, but we are not using DHCP on our DCS. I can
> run a netstat command and see that Name used configured in the hosts=20
> table matches the IP address when the WYSE terminal connects to the=20
> 51G workstation.
> As Fritz mentioned below, for some reason when you try to dedicate a=20
> DM to a WYSE 5150 it gets ignored.
>
> Regards,
>
> James Mueller
> Senior Process Control Engineer
> Cliffs Michigan Mining Co.
> (906) 475-3534
> JDMueller@xxxxxxxxxxxxxxxxxxxx
> =3D20
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx=20
> [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Ulrich Wieczorek
> Sent: Friday, May 11, 2007 3:48 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] WYSE 5150SE
>
> As far as I know, X terminals are identified by their IP address.
> If your terminal gets its address from a DHCP server, you will not be=20
> able to use a dedicated display manager. Maybe your pc has a fixed IP=20
> address and your WYSE terminal has not.
>
> Regards,
> Ulrich Wieczorek
>
> Schouten, Frits JF schrieb:
> > The same problem here but I cannot, for anything in the world,=20
> >figure=3D20 this one out.
> > I've now configured dmcfg such that the xterm is no longer using=20
> >a=3D20 dedicated display.
> > How can I find out how the WYSE 5150 is identifying itself on the=3D2=
0
> >network?
> >=3D20
> > Cheers,
> > Frits.
> >=3D20
> >=3D20
> > -----Original Message-----
> > From: foxboro-bounce@xxxxxxxxxxxxx=3D20 =20
> >[mailto:foxboro-bounce@xxxxxxxxxxxxx]
> > On Behalf Of Mueller, Jim D.
> > Sent: Thursday, 10 May 2007 5:41 AM
> > To: foxboro@xxxxxxxxxxxxx
> > Subject: [foxboro] WYSE 5150SE
> >=3D20
> > Gentlemen,
> > =3D3D09I am setting up a WYSE 5150SE terminal to use as an xterminal.
> > I am able to set up a display manager in the dmcfg file and connect=20
> >to
>
> > it without any Problem. The one strange thing that I am running=20
> > into=3D20 is that I cannot get the WYSE 5150 to connect to a dedicate=
d
> > display=3D20 manager. I can use the Same configuration and open a=20
> > dedicated=3D20 display manager using a Exceed session. Although it=20
> > does not make=3D20 sense, the problem only occurs when using A WYSE=20
> > 5150SE terminal. Has
>
> > anyone out there run across this same problem?
> >=3D20
> >=3D20
> > Thanks for your help in advance!
> >=3D20
> > James Mueller
> > Senior Process Control Engineer
> > Cliffs Michigan Mining Co.
> > (906) 475-3534
> > JDMueller@xxxxxxxxxxxxxxxxxxxx
> >=3D20
> --
> -------------------------------------------
> Ulrich Wieczorek
> Erpicon Software Development GmbH
> Neusser Str. 724-726
> D-50737 Koeln
> Tel.: +49-221-9746067
> Fax: +49-221-9746099
> =3D20
> =3D20
> ______________________________________________________________________
> _ This mailing list is neither sponsored nor endorsed by Invensys=20
> Process Systems (formerly The Foxboro Company). Use the info you=20
> obtain here at your own risks. Read=20
> http://www.thecassandraproject.org/disclaimer.html
> =3D20
> foxboro mailing list:
//www.freelists.org/list/foxboro
> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin=3D
>
> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave=3D
>
> =3D20
> ######################################################################
> ###=3D
> ######
> This electronic message and any attachments included with this message
> ar=3D e for the exclusive use of the individual or entity to which it=20
> is intende=3D d to be addressed. This message may contain information=20
> that is privileged =3D or confidential and thereby exempt and protected=
=20
> from unauthorized disclosur=3D e under applicable law. If the reader of=
=20
> this message is not the intended recipient, or an employee or agent=20
> responsible for delivering the message=3D =3D20to the intended recipien=
t,=20
> be aware that any disclosure, dissemination, distribution or copying=20
> of this communication, or the use of its contents=3D , is not authorize=
d
> and is strictly prohibited. If you have received this communication=20
> and are not the intended recipient, please notify the sende=3D r=20
> immediately and permanently delete the original message from your=20
> e-mail system.
> ######################################################################
> ###=3D
> ######
>
>
> ______________________________________________________________________
> _ This mailing list is neither sponsored nor endorsed by Invensys=20
> Process Systems (formerly The Foxboro Company). Use the info you=20
> obtain here at your own risks. Read=20
> http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:
//www.freelists.org/list/foxboro
> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
>
>
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
=0A=0ANOTICE - This message and any attached files may contain informatio=
n that is confidential and intended only for use by the intended recipien=
t. If you are not the intended recipient or the person responsible for de=
livering the message to the intended recipient, be advised that you have =
received this message in error and that any dissemination, copying or use=
of this message or attachment is strictly forbidden, as is the disclosur=
e of the information therein. If you have received this message in error =
please notify the sender immediately and delete the message.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
