I cannot speak for Frits, but we are not using DHCP on our DCS. I can run a netstat command and see that Name used configured in the hosts table matches the IP address when the WYSE terminal connects to the 51G workstation. As Fritz mentioned below, for some reason when you try to dedicate a DM to a WYSE 5150 it gets ignored. Regards, James Mueller Senior Process Control Engineer Cliffs Michigan Mining Co. (906) 475-3534 JDMueller@xxxxxxxxxxxxxxxxxxxx =20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Ulrich Wieczorek Sent: Friday, May 11, 2007 3:48 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] WYSE 5150SE As far as I know, X terminals are identified by their IP address. If your terminal gets its address from a DHCP server, you will not be able to use a dedicated display manager. Maybe your pc has a fixed IP address and your WYSE terminal has not. Regards, Ulrich Wieczorek Schouten, Frits JF schrieb: > The same problem here but I cannot, for anything in the world, figure=20 > this one out. > I've now configured dmcfg such that the xterm is no longer using a=20 > dedicated display. > How can I find out how the WYSE 5150 is identifying itself on the=20 > network? >=20 > Cheers, > Frits. >=20 >=20 > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx=20 > [mailto:foxboro-bounce@xxxxxxxxxxxxx] > On Behalf Of Mueller, Jim D. > Sent: Thursday, 10 May 2007 5:41 AM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] WYSE 5150SE >=20 > Gentlemen, > =3D09I am setting up a WYSE 5150SE terminal to use as an xterminal. > I am able to set up a display manager in the dmcfg file and connect to > it without any Problem. The one strange thing that I am running into=20 > is that I cannot get the WYSE 5150 to connect to a dedicated display=20 > manager. I can use the Same configuration and open a dedicated=20 > display manager using a Exceed session. Although it does not make=20 > sense, the problem only occurs when using A WYSE 5150SE terminal. Has > anyone out there run across this same problem? >=20 >=20 > Thanks for your help in advance! >=20 > James Mueller > Senior Process Control Engineer > Cliffs Michigan Mining Co. > (906) 475-3534 > JDMueller@xxxxxxxxxxxxxxxxxxxx >=20 -- ------------------------------------------- Ulrich Wieczorek Erpicon Software Development GmbH Neusser Str. 724-726 D-50737 Koeln Tel.: +49-221-9746067 Fax: +49-221-9746099 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin= to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave= =20 #########################################################################= ###### This electronic message and any attachments included with this message ar= e for the exclusive use of the individual or entity to which it is intende= d to be addressed. This message may contain information that is privileged = or confidential and thereby exempt and protected from unauthorized disclosur= e under applicable law. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering the message= =20to the intended recipient, be aware that any disclosure, dissemination, distribution or copying of this communication, or the use of its contents= , is not authorized and is strictly prohibited. If you have received this communication and are not the intended recipient, please notify the sende= r immediately and permanently delete the original message from your e-mail system. #########################################################################= ###### _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave