Re: [foxboro] WYSE 5150SE
- From: "Kevin Fitzgerrell" <fitzgerrell@xxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 11 May 2007 20:49:35 +0900
When you use the "show DM usage" screen, what shows for the user name
by the WYSE?
Kevin FitzGerrell
On 5/11/07, Mueller, Jim D. <JDMueller@xxxxxxxxxxxxxxxxxxxx> wrote:
> I cannot speak for Frits, but we are not using DHCP on our DCS. I can
> run a netstat command and see that
> Name used configured in the hosts table matches the IP address when the
> WYSE terminal connects to the 51G workstation.
> As Fritz mentioned below, for some reason when you try to dedicate a DM
> to a WYSE 5150 it gets ignored.
>
> Regards,
>
> James Mueller
> Senior Process Control Engineer
> Cliffs Michigan Mining Co.
> (906) 475-3534
> JDMueller@xxxxxxxxxxxxxxxxxxxx
> =20
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Ulrich Wieczorek
> Sent: Friday, May 11, 2007 3:48 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] WYSE 5150SE
>
> As far as I know, X terminals are identified by their IP address.
> If your terminal gets its address from a DHCP server, you will not be
> able to use a dedicated display manager. Maybe your pc has a fixed IP
> address and your WYSE terminal has not.
>
> Regards,
> Ulrich Wieczorek
>
> Schouten, Frits JF schrieb:
> > The same problem here but I cannot, for anything in the world, figure=20
> > this one out.
> > I've now configured dmcfg such that the xterm is no longer using a=20
> > dedicated display.
> > How can I find out how the WYSE 5150 is identifying itself on the=20
> > network?
> >=20
> > Cheers,
> > Frits.
> >=20
> >=20
> > -----Original Message-----
> > From: foxboro-bounce@xxxxxxxxxxxxx=20
> > [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> > On Behalf Of Mueller, Jim D.
> > Sent: Thursday, 10 May 2007 5:41 AM
> > To: foxboro@xxxxxxxxxxxxx
> > Subject: [foxboro] WYSE 5150SE
> >=20
> > Gentlemen,
> > =3D09I am setting up a WYSE 5150SE terminal to use as an xterminal.
> > I am able to set up a display manager in the dmcfg file and connect to
>
> > it without any Problem. The one strange thing that I am running into=20
> > is that I cannot get the WYSE 5150 to connect to a dedicated display=20
> > manager. I can use the Same configuration and open a dedicated=20
> > display manager using a Exceed session. Although it does not make=20
> > sense, the problem only occurs when using A WYSE 5150SE terminal. Has
>
> > anyone out there run across this same problem?
> >=20
> >=20
> > Thanks for your help in advance!
> >=20
> > James Mueller
> > Senior Process Control Engineer
> > Cliffs Michigan Mining Co.
> > (906) 475-3534
> > JDMueller@xxxxxxxxxxxxxxxxxxxx
> >=20
> --
> -------------------------------------------
> Ulrich Wieczorek
> Erpicon Software Development GmbH
> Neusser Str. 724-726
> D-50737 Koeln
> Tel.: +49-221-9746067
> Fax: +49-221-9746099
> =20
> =20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =20
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
>
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
>
> =20
> #########################################################################=
> ######
> This electronic message and any attachments included with this message ar=
> e
> for the exclusive use of the individual or entity to which it is intende=
> d
> to be addressed. This message may contain information that is privileged =
> or
> confidential and thereby exempt and protected from unauthorized disclosur=
> e
> under applicable law. If the reader of this message is not the intended
> recipient, or an employee or agent responsible for delivering the message=
> =20to
> the intended recipient, be aware that any disclosure, dissemination,
> distribution or copying of this communication, or the use of its contents=
> ,
> is not authorized and is strictly prohibited. If you have received this
> communication and are not the intended recipient, please notify the sende=
> r
> immediately and permanently delete the original message from your e-mail
> system.
> #########################################################################=
> ######
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
