Kevin, =09When I look at the DM Usage, the active screen shows XT5108. XT5108 is the name configured in the hosts table for the WYSE box. This is the same name that I am using to dedicate a DM, but it ignores the dedicated DM and opens A undedicated DM. Regards, James Mueller Senior Process Control Engineer Cliffs Michigan Mining Co. (906) 475-3534 JDMueller@xxxxxxxxxxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Fitzgerrell Sent: Friday, May 11, 2007 7:50 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] WYSE 5150SE When you use the "show DM usage" screen, what shows for the user name by the WYSE? Kevin FitzGerrell On 5/11/07, Mueller, Jim D. <JDMueller@xxxxxxxxxxxxxxxxxxxx> wrote: > I cannot speak for Frits, but we are not using DHCP on our DCS. I can > run a netstat command and see that Name used configured in the hosts=20 > table matches the IP address when the WYSE terminal connects to the=20 > 51G workstation. > As Fritz mentioned below, for some reason when you try to dedicate a=20 > DM to a WYSE 5150 it gets ignored. > > Regards, > > James Mueller > Senior Process Control Engineer > Cliffs Michigan Mining Co. > (906) 475-3534 > JDMueller@xxxxxxxxxxxxxxxxxxxx > =3D20 > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx=20 > [mailto:foxboro-bounce@xxxxxxxxxxxxx] > On Behalf Of Ulrich Wieczorek > Sent: Friday, May 11, 2007 3:48 AM > To: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] WYSE 5150SE > > As far as I know, X terminals are identified by their IP address. > If your terminal gets its address from a DHCP server, you will not be=20 > able to use a dedicated display manager. Maybe your pc has a fixed IP=20 > address and your WYSE terminal has not. > > Regards, > Ulrich Wieczorek > > Schouten, Frits JF schrieb: > > The same problem here but I cannot, for anything in the world,=20 > >figure=3D20 this one out. > > I've now configured dmcfg such that the xterm is no longer using=20 > >a=3D20 dedicated display. > > How can I find out how the WYSE 5150 is identifying itself on the=3D2= 0 > >network? > >=3D20 > > Cheers, > > Frits. > >=3D20 > >=3D20 > > -----Original Message----- > > From: foxboro-bounce@xxxxxxxxxxxxx=3D20 =20 > >[mailto:foxboro-bounce@xxxxxxxxxxxxx] > > On Behalf Of Mueller, Jim D. > > Sent: Thursday, 10 May 2007 5:41 AM > > To: foxboro@xxxxxxxxxxxxx > > Subject: [foxboro] WYSE 5150SE > >=3D20 > > Gentlemen, > > =3D3D09I am setting up a WYSE 5150SE terminal to use as an xterminal.= > > I am able to set up a display manager in the dmcfg file and connect=20 > >to > > > it without any Problem. The one strange thing that I am running=20 > > into=3D20 is that I cannot get the WYSE 5150 to connect to a dedicate= d > > display=3D20 manager. I can use the Same configuration and open a=20 > > dedicated=3D20 display manager using a Exceed session. Although it=20 > > does not make=3D20 sense, the problem only occurs when using A WYSE=20 > > 5150SE terminal. Has > > > anyone out there run across this same problem? > >=3D20 > >=3D20 > > Thanks for your help in advance! > >=3D20 > > James Mueller > > Senior Process Control Engineer > > Cliffs Michigan Mining Co. > > (906) 475-3534 > > JDMueller@xxxxxxxxxxxxxxxxxxxx > >=3D20 > -- > ------------------------------------------- > Ulrich Wieczorek > Erpicon Software Development GmbH > Neusser Str. 724-726 > D-50737 Koeln > Tel.: +49-221-9746067 > Fax: +49-221-9746099 > =3D20 > =3D20 > ______________________________________________________________________ > _ This mailing list is neither sponsored nor endorsed by Invensys=20 > Process Systems (formerly The Foxboro Company). Use the info you=20 > obtain here at your own risks. Read=20 > http://www.thecassandraproject.org/disclaimer.html > =3D20 > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin=3D > > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave=3D > > =3D20 > ###################################################################### > ###=3D > ###### > This electronic message and any attachments included with this message > ar=3D e for the exclusive use of the individual or entity to which it = > is intende=3D d to be addressed. This message may contain information=20 > that is privileged =3D or confidential and thereby exempt and protected= =20 > from unauthorized disclosur=3D e under applicable law. If the reader of= =20 > this message is not the intended recipient, or an employee or agent=20 > responsible for delivering the message=3D =3D20to the intended recipien= t,=20 > be aware that any disclosure, dissemination, distribution or copying=20 > of this communication, or the use of its contents=3D , is not authorize= d > and is strictly prohibited. If you have received this communication=20 > and are not the intended recipient, please notify the sende=3D r=20 > immediately and permanently delete the original message from your=20 > e-mail system. > ###################################################################### > ###=3D > ###### > > > ______________________________________________________________________ > _ This mailing list is neither sponsored nor endorsed by Invensys=20 > Process Systems (formerly The Foxboro Company). Use the info you=20 > obtain here at your own risks. Read=20 > http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > > =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin= to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave= =20 #########################################################################= ###### This electronic message and any attachments included with this message ar= e for the exclusive use of the individual or entity to which it is intende= d to be addressed. This message may contain information that is privileged = or confidential and thereby exempt and protected from unauthorized disclosur= e under applicable law. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering the message= =20to the intended recipient, be aware that any disclosure, dissemination, distribution or copying of this communication, or the use of its contents= , is not authorized and is strictly prohibited. If you have received this communication and are not the intended recipient, please notify the sende= r immediately and permanently delete the original message from your e-mail system. #########################################################################= ###### _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave