[TechAssist] Re: troubleshooting HDMI input problems with no HDMI equipped sig-gens?
- From: Phil Bader <tjanphyl@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 07 Apr 2005 12:13:45 -0400
$650.00 not bad... I think I saw this in MCM under their name for the
same price. I guess CMM (Computer Monitor Maintanence) version for
$500.00 only has the component outs.
Maybe since we only need to verify that the darn HDMI port in the tv
works, there will be a cheaper DVD deck out there we can plug in. Too
bad someone doesn't come out with a palm sized box that outputs a simple
test color bar patern and a 1K Hz audio tone with a HDMI output port.
That would be a good tester.
Phil Bader
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
Jim Myers wrote:
>You didn't look at the link Phil, it is a generator that has what you
>don't have.
>
>
>********************************
>Since 1972 *
>Jim Myers *
>Telrad Electronics *
>Fort Wayne Indiana *
>********************************
>
>
>Phil Bader wrote:
>
>
>>That's not possible, since our sencores are only equipped with RF,
>>conposite, VESA, and component video outputs.
>>I don't think theres an adaptor to go from HD component jacks to HDMI.
>>And there's the audio component to consider.
>>Phil Bader
>>
>>Philip Bader
>>Jan Phyl TV Inc. (estab. 1976)
>>3420 Recker Hwy. Winter Haven, Fl. 33880
>>Fax (863) 299-8821
>>email: tjanphyl@xxxxxxxxxxxxxxx
>>
>>
>>
>>Jim Myers wrote:
>>
>>
>>
>>
>>>http://www.hallresearch.com/products/vga_processor/DVC-3.htm
>>>
>>>Just add a DVI to HDMI adapter cable.
>>>
>>>Then you have ALL possible input types covered, until next years models
>>>come out that is!
>>>
>>>
>>>********************************
>>>Since 1972 *
>>>Jim Myers *
>>>Telrad Electronics *
>>>Fort Wayne Indiana *
>>>********************************
>>>
>>>
>>>Phil Bader wrote:
>>>
>>>
>>>
>>>
>>>
>>>>A local shop I know is going out to a call on a new PTV, customer says
>>>>the HDMI inputs don't work.
>>>>We both have the Sencore sig gens, his is the VP300, mine the VP301
>>>>(mine has a cable/RF connector added) Our gens output with the
>>>>composite, and component video outputs and have no HDMI.
>>>>Really, there seems no real need for the HDMI outputs to align, since we
>>>>can get the HD signal into the TV VIA the other available
>>>>output(component video). But I guess we at least need to basically
>>>>verify if the HDMIs works. Suggestions? carry a small "HDMI" equipped
>>>>DVD player? Is there a small basic sig gen with HDMI for a decent price?
>>>>Adaptors?
>>>>Phil Bader
>>>>
>>>>
>>>>
>>>>
>>>>
>>>-----------------------------------------------------------------------------
>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>>Email Archives: //www.freelists.org/archives/techassist/
>>>
>>>
>>>
>>>
>>>
>>>
>>-----------------------------------------------------------------------------
>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>Email Archives: //www.freelists.org/archives/techassist/
>>
>>
>>
>-----------------------------------------------------------------------------
>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>Email Archives: //www.freelists.org/archives/techassist/
>
>
>
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts: