That's not possible, since our sencores are only equipped with RF, conposite, VESA, and component video outputs. I don't think theres an adaptor to go from HD component jacks to HDMI. And there's the audio component to consider. Phil Bader Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx Jim Myers wrote: >http://www.hallresearch.com/products/vga_processor/DVC-3.htm > >Just add a DVI to HDMI adapter cable. > >Then you have ALL possible input types covered, until next years models >come out that is! > > >******************************** >Since 1972 * >Jim Myers * >Telrad Electronics * >Fort Wayne Indiana * >******************************** > > >Phil Bader wrote: > > >>A local shop I know is going out to a call on a new PTV, customer says >>the HDMI inputs don't work. >>We both have the Sencore sig gens, his is the VP300, mine the VP301 >>(mine has a cable/RF connector added) Our gens output with the >>composite, and component video outputs and have no HDMI. >>Really, there seems no real need for the HDMI outputs to align, since we >>can get the HD signal into the TV VIA the other available >>output(component video). But I guess we at least need to basically >>verify if the HDMIs works. Suggestions? carry a small "HDMI" equipped >>DVD player? Is there a small basic sig gen with HDMI for a decent price? >>Adaptors? >>Phil Bader >> >> >> >----------------------------------------------------------------------------- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/