Bob; Disk caps on the CRT socket I presume. I think I have narrowed it down to something shorted in the CRT socket. Ed Gaidies Tel-Tek Electronics Ontario-Canada Servicing the Consumer Electronic Industry since 1963 teltek3@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of woodman1@xxxxxxxx Sent: Friday, February 13, 2004 7:36 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: CTC197CD RCA Yes Ed, It was the spark gap that goes around all the pin sockets.. it was hitting one of the pin sockets.. Check all the disk caps to.. Bob Bobs TV Worcester, ma -----Original Message----- From: Ed Gaidies <teltek3@xxxxxxxxxxxx> Sent: Feb 13, 2004 4:15 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: CTC197CD RCA Bob; I have about 150 volts on the screen Out..but as soon a I connect the screen lead to the CRT socket, drops to zero. This is even with the CRT board pulled from the tube. Do you remember what was shorted on the CRT socket. That screen voltage coming out of the Flyback seems low at 150, but I suspect something shorted on the CRT Board. -Ed- Ed Gaidies Tel-Tek Electronics. Ontario-Canada teltek3@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Bob@Bobs tv Sent: February 13, 2004 2:13 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: CTC197CD RCA Ed, Don't have print, but did you check CRT and CRT socket for shorts? Had a set, the socket was shorted and took out the controls section on fly... Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, February 13, 2004 1:21 PM Subject: [TechAssist] CTC197CD RCA > Would someone have a Manual on this set. Particularly the Sweep ciruit. > This set was originally Dead. > Replaced Flyback 237506, Got HV and sound back. But seems I have no > Screen Voltage. (Zero). So of course I have no raster. I have tried a > second flyback, thinking a faulty transformer, but same result. > > A Circuit and any suggestions appreciated. > > Thanks; > > -Ed- > > Ed Gaidies > Tel-Tek Electronics. > Ontario-Canada > > teltek3@xxxxxxxxxxxx > > > > ------------------------------------------------------------------------ -- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/