Al; There was a blue cap that came with the Flyvback, and also a resistor. I changed those along with the Flyback. Unless you are talking about a different poly cap. -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada Servicing the Consumer Electronic Industry since 1963 teltek3@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of al m Sent: Friday, February 13, 2004 5:13 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: CTC197CD RCA There should be a blue poly cap on the screen line. Change it. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, February 13, 2004 4:15 PM Subject: [TechAssist] Re: CTC197CD RCA > Bob; > I have about 150 volts on the screen Out..but as soon a I connect the > screen lead to the CRT socket, drops to zero. > This is even with the CRT board pulled from the tube. > > Do you remember what was shorted on the CRT socket. > > That screen voltage coming out of the Flyback seems low at 150, but I > suspect something shorted on the CRT Board. > > -Ed- > > > Ed Gaidies > Tel-Tek Electronics. > Ontario-Canada > > teltek3@xxxxxxxxxxxx > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Bob@Bobs tv > Sent: February 13, 2004 2:13 PM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: CTC197CD RCA > > Ed, > Don't have print, but did you check CRT and CRT socket for shorts? > Had a > set, the socket was shorted and took out the controls section on fly... > Bob, > > Bobs TV Worcester, ma > > woodman1@xxxxxxxx > > Main 508-853-1482 > Fax 508-853-1480 > ----- Original Message ----- > From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, February 13, 2004 1:21 PM > Subject: [TechAssist] CTC197CD RCA > > > > Would someone have a Manual on this set. Particularly the Sweep > ciruit. > > This set was originally Dead. > > Replaced Flyback 237506, Got HV and sound back. But seems I have no > > Screen Voltage. (Zero). So of course I have no raster. I have tried a > > second flyback, thinking a faulty transformer, but same result. > > > > A Circuit and any suggestions appreciated. > > > > Thanks; > > > > -Ed- > > > > Ed Gaidies > > Tel-Tek Electronics. > > Ontario-Canada > > > > teltek3@xxxxxxxxxxxx > > > > > > > > > ------------------------------------------------------------------------ > -- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > ------------------------------------------------------------------------ > ----- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > ------------------------------------------------------------------------ -- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/