[tccrockets] Re: Attn: Brian Dalby
- From: "JACK GARIBALDI" <jackgaribaldi@xxxxxxx>
- To: <tccrockets@xxxxxxxxxxxxx>
- Date: Thu, 13 Oct 2011 21:26:27 -0700
CTI does not do 18mm loads
Jack G
----- Original Message -----
From: Rob Diehl<mailto:rwdiehl@xxxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx<mailto:tccrockets@xxxxxxxxxxxxx>
Sent: Thursday, October 13, 2011 9:24 PM
Subject: [tccrockets] Re: Attn: Brian Dalby
I thought they were going to do some cti grains in there.
I can do sugar but I don't have any casting tubes that size.
From: tccrockets-bounce@xxxxxxxxxxxxx<mailto:tccrockets-bounce@xxxxxxxxxxxxx>
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi
Sent: Thursday, October 13, 2011 8:37 PM
To: tccrockets@xxxxxxxxxxxxx<mailto:tccrockets@xxxxxxxxxxxxx>
Subject: [tccrockets] Re: Attn: Brian Dalby
Have Rob do some sugar loads for you for testing.
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
Sent: Thursday, October 13, 2011 7:56 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Attn: Brian Dalby
Nice!
From: tccrockets-bounce@xxxxxxxxxxxxx<mailto:tccrockets-bounce@xxxxxxxxxxxxx>
[mailto:tccrockets-bounce@xxxxxxxxxxxxx]<mailto:[mailto:tccrockets-bounce@xxxxxxxxxxxxx]>
On Behalf Of Chvy91bowtie@xxxxxxx<mailto:Chvy91bowtie@xxxxxxx>
Sent: Thursday, October 13, 2011 9:58 AM
To: tccrockets@xxxxxxxxxxxxx<mailto:tccrockets@xxxxxxxxxxxxx>
Subject: [tccrockets] Attn: Brian Dalby
Brian, I finally got around to machining the 18mm hardware we talked about
back at DA. Not sure if it will work but I think it looks pretty cool. I will
bring a set to October Skies for you. The shiny object in the center is a dime
for scale.
Other related posts:
