[tccrockets] Re: Attn: Brian Dalby

From: "Paul M. Pittenger" <pmp42@xxxxxxxxxxx>
To: <tccrockets@xxxxxxxxxxxxx>
Date: Thu, 13 Oct 2011 21:12:54 -0700

Cool, that is a pretty long 18mm... what is the max impulse range?  
  ----- Original Message ----- 
  From: Jack Garibaldi 
  To: tccrockets@xxxxxxxxxxxxx 
  Sent: Thursday, October 13, 2011 8:36 PM
  Subject: [tccrockets] Re: Attn: Brian Dalby


  Have Rob do some sugar loads for you for testing.

   

  Jack G

   

  From: tccrockets-bounce@xxxxxxxxxxxxx 
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
  Sent: Thursday, October 13, 2011 7:56 PM
  To: tccrockets@xxxxxxxxxxxxx
  Subject: [tccrockets] Re: Attn: Brian Dalby

   

  Nice!

   

  From: tccrockets-bounce@xxxxxxxxxxxxx 
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Chvy91bowtie@xxxxxxx
  Sent: Thursday, October 13, 2011 9:58 AM
  To: tccrockets@xxxxxxxxxxxxx
  Subject: [tccrockets] Attn: Brian Dalby

   

  Brian, I finally got around to machining the 18mm hardware we talked about 
back at DA. Not sure if it will work but I think it looks pretty cool. I will 
bring a set to October Skies for you. The shiny object in the center is a dime 
for scale.

References:
- [tccrockets] Attn: Brian Dalby
  - From: Chvy91bowtie
- [tccrockets] Re: Attn: Brian Dalby
  - From: Rob Diehl
- [tccrockets] Re: Attn: Brian Dalby
  - From: Jack Garibaldi

[tccrockets] Re: Attn: Brian Dalby

Other related posts: