Harry, Here is what you are missing. An MP3 file is a compressed file, similar to a zip file. You can't edit a file that is zipped until you uncompress it, and that is the same reason an MP3 file has to be uncompressed before you can use it. From: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Harry Brown Sent: Tuesday, June 12, 2012 2:01 PM To: studiorecorder@xxxxxxxxxxxxx Subject: [studiorecorder] Re: I'm so frustrated with studio recorder, how can I fix this problem? Hi chase, But that process, is takes time, and is not good file editing management. A user should be able to go and edit it, in the format it's already in. Harry ----- Original Message ----- From: Chase Crispin<mailto:chase.crispin@xxxxxxxxx> To: studiorecorder@xxxxxxxxxxxxx<mailto:studiorecorder@xxxxxxxxxxxxx> Sent: Tuesday, June 12, 2012 2:38 PM Subject: [studiorecorder] Re: I'm so frustrated with studio recorder, how can I fix this problem? To add to what Mary has said, you can change a mp3 to a wav in studio recorder by doing the following. 1. Open the mp3 file as you usually would. 2. Go to the file menu by pressing alt+f. 3. Down arrow to or press d to get to decode. This will make your mp3 file a wav file. 4. Once the decode process has completed, go to the file menu again and choose save as. Find where you want to save the file and press save. A wav copy of the file will now be saved on your hard drive. Thanks, Chase Crispin http://www.blindmobiletech.com/ chase.crispin@xxxxxxxxx<mailto:chase.crispin@xxxxxxxxx> -----Original Message----- From: studiorecorder-bounce@xxxxxxxxxxxxx<mailto:studiorecorder-bounce@xxxxxxxxxxxxx> [mailto:studiorecorder-bounce@xxxxxxxxxxxxx]<mailto:[mailto:studiorecorder-bounce@xxxxxxxxxxxxx]> On Behalf Of Mary Emerson Sent: Tuesday, June 12, 2012 1:33 PM To: studiorecorder@xxxxxxxxxxxxx<mailto:studiorecorder@xxxxxxxxxxxxx> Subject: [studiorecorder] Re: I'm so frustrated with studio recorder, how can I fix this problem? Harry, You're confusing us; it's hard to figure out whether you're in studio recorder when you find the .wav file, or if you're in studio recorder and you find an MP3 file. Or are you looking at a file in a file list, outside studio recorder, and want to convert it? if you're in Studio Recorder and want to save a .wav file as an MP3 file, you can export it as MP3; the word is export, not save. To get to the export dialog, press alt, arrow down to export as mp3, and press enter. If you have an mP3 file and want to convert it to .wav, there is third-party software, such as switch, that can convert file formats. Or, if you're in studio recorder and want to bring in an mp3 file to edit, use import, or control-i. It will take a while because studio recorder has to convert the mp3 file to .wav before it can work with it. Mary