Thomas, The system break requires that you select a bar line, which is a system item. Sounds like what you want, though, would be to use the plug-in "Make Layout Uniform". Rehearsal letters are not automatically inserted. From the vantage point of the last note before you want the rehearsal letter, press ctrl+r. Dale Are you sure Sibelius is actually writing another symbol than flat, or might JAWS just be speaking it incorrectly? Dale -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Thomas Böttcher Sent: Sunday, April 13, 2014 8:14 AM To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] system breaks and question about chord symbols Hi all, What is the correct way to insert a system break? I tried selecting the bar and hen went into the menu and to system break but got the message " please select a single note or chord" or something similar. I would like a new system every for bars and double bar lines with every rehearsal letter. Are these inserted automatically? Furthermore, I experience a strange thing inserting chord symbols: Using sib 3.1 and sib speaking I could always put a b to indicate a flat like Bb minor. Now, the capital B is written down correctly but when I put a small b to indicate a flat sibelius seems to put a different symbol. Has anybody else experienced that and is there maybe an alternative way to put a symbol to indicate a flat? Thanks so much for your help. Cheers Thomas If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx