On 04 Mar, Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: > I reverted to RISC OS 4.02 on another machine, Printers 1.64a, > GPDriver 2.04 and S800 from PrintersG. This does print out on my > machine. > Next thing to check is the following: > Go in to printers and alter the destination to file and drag the > "Printout" icon to your hard disc and then print a line of text. > Load the "PrintOut" file in to a text editor and you should see > something like this at the start: Done. This is the start of the printout file: [1b]9b[01][00][01][1b](q[01][00][01][1b](m[0c][00][02]ÿÿ[00][00] > [K BJLSTART > ControlMode=Common > AckTime=Short > BJLEND > [K > If you don't then for some reason you have still perhaps got the > Gutenprint 2.02 loaded or being seen and not 2.04. > One other thing make sure that in the filer options you have got > "Force" and "Newer" set by clicking menu in a directory and going down > to Options. Reinsatll 2.04 over your GP2Driver or better still delete > it and put it back in again if you are unsure. That's exactly what I did when I put Gutenprint 2.04 in originally! Alan Griffin