[pure-silver] Re: Jobo Processor advice - reply and thanks
- From: "Stein" <rstein@xxxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Mon, 12 Sep 2005 18:03:23 +0800
Dear Friends,
Thank you to all who replied. The consensus seems to be drainage -
always a good idea in my profession - and I am going to try the experiment
of setting a syphon to work into the sink after each session. If it works it
should remove most of the weight and I can tip the rest out. I am happy with
the thought of not collecting a lot of stale water in the place - I tipped
out the water bath of a Nova processor that had cycled hot and cold for
years and it was a lesson in natural history all right....
Uncle Dick
PS: Advice now sought on a suitable device that will wash 20" x 24"
prints. I have been using the bathtub but I think there must be a better
way. Water will become almost as expensive as petrol in the future and I
want to save it.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
