[modeleng] Re: Shim Stock
- From: "Terry Lane" <tel@xxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 9 Sep 2005 09:37:15 +1000
Wot happened - couldn't workers & management reach accord?
> Sorry Tel, The string mines got closed down 15 years ago, major job
> losses!!!!!!!
>
> These days you have trouble finding decent string, ask the locals and all
> you get is " sorry... fraid knot ".
>
>
> ----- Original Message -----
> From: "Terry Lane" <tel@xxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Thursday, September 08, 2005 10:34 PM
> Subject: [modeleng] Re: Shim Stock
>
>
>
> Ah yes John, but you are close to the famous string mines at Tamworth.
>
>
> > I have been known to use string to compress one ring at a time to and
push
> > the piston into place. Slow but effective.
> >
> > Regards to all
> >
> > John
> >
> >
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email to,
> > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> line.
> >
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
