[PCB_FORUM] Re: UNIX vs PC Workstation
- From: "Mike Shannon" <mshannon@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 29 Jun 2004 09:58:52 -0400
Steve,
You can't rlogin into a windows box.
You will need to look at a Citrix type solution for the engineers - a
server based solution for the PC world.
The option would be to look at a Linux platform - the power of PC
hardware - and the ease of use of a Unix - did I really just say that? - of
the command line/interface.
Mike
-----Original Message-----
From: Steve.J Miller [mailto:Steve.J.Miller@xxxxxxx]
Sent: Tuesday, June 29, 2004 9:28 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] UNIX vs PC Workstation
I just joined the list, so this topic may have already been covered.
We are currently running on UNIX servers. They are going to replace them
soon. Cost wise between a UNIX server and a PC workstation it is pretty
much even. My supervisor wants to know if switching to the PC workstation
version would be beneficial. We only have 3 board designers. The engineers
rlog in to the servers to use Concept. We have 8-10 engineers that use
Concept though only a few at any given time.
Any thoughts or opinions.
Thank you.
Steve Miller
TRW Automotive Electronics
Winona, MN 55987
(507) 457-3750 Ext 8356
steve.j.miller@xxxxxxx
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/2004
Other related posts:
