What version are you running? I think I was running 1.03 or some earlier version when I did the factory reset Danny -----Original Message----- From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Keys Sent: Friday, July 06, 2007 8:27 PM To: icon-discuss@xxxxxxxxxxxxx Subject: [icon-discuss] Re: Cleaning out personal information Hello, Done that and it doesn't work any different than a normal reset. Dan On Jul 6, 2007, at 5:01 PM, Danny Norris wrote: > Dan, > I've reset my unit to factory defaults at one time using the way > Barbara suggested. The trick is to release the * or the # key after > releasing the reset key. I would suggest holding the * or # key 5 > seconds more after releasing the reset key. > Danny > -----Original Message----- > From: icon-discuss-bounce@xxxxxxxxxxxxx > [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Keys > Sent: Friday, July 06, 2007 7:11 PM > To: icon-discuss@xxxxxxxxxxxxx > Subject: [icon-discuss] Re: Cleaning out personal information > > Hello, > It doesn't work at all, just a normal reset, that's all. > Dan > On Jul 6, 2007, at 3:26 PM, Governor Staten wrote: > >> there is a command to do this. turn the unit so that the battery side >> is facing up. take the battery cap off, and on the right side of that >> compartment is the reset button. you will have to use a paper clip or >> something pointy to get to the reset button. hold the reset button >> with the star key in combination for a couple of seconds. When it >> vibrates once, let the reset button go and keep holding down the star >> key until it vibrates again. then, wait until it starts speaking. >> >> Dan Keys wrote: >>> >>> Hello, >>> In short, Is there a command to reset the Icon truly back to all >>> factory defaults. In other words, as shipped originally? >>> This is something that is really needed, I think. >>> Dan >>> On Jul 6, 2007, at 3:02 PM, Richard Turner wrote: >>> >>>> Greetings, >>>> >>>> I have a demo Icon that the agency I work for is purchasing for a >>>> client. >>>> >>>> I put in my bookshare user name and password. >>>> I would like to remove that before it is given to the client. >>>> How do I do that? >>>> Also, is there an easy way to wipe out the planner, rather than >>>> deleting individual appointments? >>>> And, lastly, is there an easy way to delete everything in the >>>> address book? >>>> >>>> Thanks, >>>> Richard >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >> > > >