Hello, 1.05. Dan On Jul 6, 2007, at 5:45 PM, Danny Norris wrote:
What version are you running? I think I was running 1.03 or some earlierversion when I did the factory reset Danny -----Original Message----- From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Keys Sent: Friday, July 06, 2007 8:27 PM To: icon-discuss@xxxxxxxxxxxxx Subject: [icon-discuss] Re: Cleaning out personal information Hello, Done that and it doesn't work any different than a normal reset. Dan On Jul 6, 2007, at 5:01 PM, Danny Norris wrote:Dan, I've reset my unit to factory defaults at one time using the way Barbara suggested. The trick is to release the * or the # key after releasing the reset key. I would suggest holding the * or # key 5 seconds more after releasing the reset key. Danny -----Original Message----- From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Keys Sent: Friday, July 06, 2007 7:11 PM To: icon-discuss@xxxxxxxxxxxxx Subject: [icon-discuss] Re: Cleaning out personal information Hello, It doesn't work at all, just a normal reset, that's all. Dan On Jul 6, 2007, at 3:26 PM, Governor Staten wrote:there is a command to do this. turn the unit so that the battery side is facing up. take the battery cap off, and on the right side of that compartment is the reset button. you will have to use a paper clip orsomething pointy to get to the reset button. hold the reset button with the star key in combination for a couple of seconds. When itvibrates once, let the reset button go and keep holding down the starkey until it vibrates again. then, wait until it starts speaking. Dan Keys wrote:Hello, In short, Is there a command to reset the Icon truly back to all factory defaults. In other words, as shipped originally? This is something that is really needed, I think. Dan On Jul 6, 2007, at 3:02 PM, Richard Turner wrote:Greetings, I have a demo Icon that the agency I work for is purchasing for a client. I put in my bookshare user name and password. I would like to remove that before it is given to the client. How do I do that? Also, is there an easy way to wipe out the planner, rather than deleting individual appointments? And, lastly, is there an easy way to delete everything in the address book? Thanks, Richard