Hi Miika, at the initiator: paola2@ubuntu2:~$ lsmod|grep xfrm xfrm_user 31160 1 xfrm_algo 14952 3 xfrm_user,esp6,esp4 xfrm6_mode_beet 12577 1 xfrm4_mode_beet 12498 1 at the responder : paola@ubuntu:~$ lsmod|grep xfrm xfrm_user 31160 1 xfrm_algo 14952 3 xfrm_user,esp6,esp4 xfrm6_mode_beet 12577 2 xfrm4_mode_beet 12498 2 Then I used ping6 with the server address and I could reach it. I invoked add map command and ping6 and waited for more then a minute but nothing happened so I stopped it: paola@ubuntu:~$ ping6 2001:10:5403:41fe:a5df:5f02:9680:b6d2PING 2001:10:5403:41fe:a5df:5f02:9680:b6d2(2001:10:5403:41fe:a5df:5f02:9680:b6d2) 56 data bytes ^C --- 2001:10:5403:41fe:a5df:5f02:9680:b6d2 ping statistics --- 222 packets transmitted, 0 received, 100% packet loss, time 221196ms paola@ubuntu:~$ hipconf daemon get ha all Sending user message 22 to HIPD on socket 3 Sent 40 bytes Waiting to receive daemon info. 240 bytes received from HIP daemon. HA is I1-SENT Shotgun mode is off. Broadcast mode is off. Local HIT: 2001:0012:421d:99a0:005d:d60f:73b0:4407 Peer HIT: 2001:0010:5403:41fe:a5df:5f02:9680:b6d2 Local LSI: 1.0.0.1 Peer LSI: 1.0.0.2 Local IP: 3ffe:0000:0000:0000:0000:0000:0000:0002 Local NAT traversal UDP port: 0 Peer IP: 3ffe:0000:0000:0000:0000:0000:0000:0001 Peer NAT traversal UDP port: 0 Peer hostname: 2013/10/16 Miika Komu <mkomu@xxxxxxxxx> > Hi Paola, > > > On 10/16/2013 12:46 PM, Paola Venuso wrote: > >> Hi Miika, >> >> I deleted the incorrect line with "hipconf" and changed the debug mode >> to "all". I'm sending two emails with the output of the debug because >> the message is too big. >> > > What does "lsmod|grep xfrm" give you? It should be: > xfrm_user 35921 1 > xfrm6_mode_beet 12658 7 > xfrm4_mode_beet 12611 7 > > > This is the output of the initiator >> > > I failed to see any 3ffe::xx/64 addresses in the log. Did you forget to > invoke "hipconf daemon add map"? > > Here's an example (please do not copy paste blindly, you need to change > the addresses and interface names): > > server: > sudo ip addr add 3ffe::1/64 dev eth0 # add IPv6 addr for server > > client: > sudo ip addr add 3ffe::2/64 dev eth0 # add IPv6 addr for client > ping6 3ffe::2 # can you reach the server? > sudo hipconf daemon rst all # reset hipd daemon state > hipconf daemon add map 2001:15:e156:8a78:3226:dbaa:**f2ff:ed06 3ffe::1 > ping6 2001:15:e156:8a78:3226:dbaa:**f2ff:ed06 > <wait for one minute> > PING > 2001:15:e156:8a78:3226:dbaa:**f2ff:ed06(2001:15:e156:8a78:**3226:dbaa:f2ff:ed06) > 56 data bytes > 64 bytes from 2001:15:e156:8a78:3226:dbaa:**f2ff:ed06: icmp_seq=2 ttl=64 > time=29.8 ms > 64 bytes from 2001:15:e156:8a78:3226:dbaa:**f2ff:ed06: icmp_seq=3 ttl=64 > time=47.5 ms > > I'd like to see "hipconf daemon get ha all" output after this. > >