RE: Help Please!!!!

  • From: "Muqeem Syed" <Syed.Muqeem@xxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Tue, 5 Feb 2002 20:07:01 +0200

Hi Raj,
I have an E2K Server here, but will try this as wel... i used arcserve
for the backup .. arcserve exchange agent.. wish me luck. now going into
the ser room for the task 

-----Original Message-----
From: Periyasamy, Raj [mailto:psraj@xxxxxxxxxxxx]
Sent: Tuesday, February 05, 2002 7:58 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Help Please!!!!

You First install a new exchange 5.5 server in a new site and
put this server in a seperate LAN from the production LAN.

I assume you have a backup software that backs up the IS as an online
database. Install the same backup software in the new server. Then
the IS to the new server. Depending on the Backup app. you may have to
specify the new server name to restore the database. By default online
backups and restore of IS and Ds always look for the server with same
in the network. Once you restore the IS, restart the server. You
should startup. In case is IS service fails, run ISINTEG -patch on
Once IS starts up, you need to run the DS/IS consistency adjuster.
ALL inconsistencies, and select synchronize with directory and create
entries for mailboxes.......

This will take a few minutes depending on your IS size. Once done, you
should see all mailboxes in you GAL. Then you assign your exchange
account as the primary owner of the mailbox you want to recover. Logon
service account, extract entire mailbox to a PST. Then use the PST to
recover the mailbox in the production server.



-----Original Message-----
From: Muqeem Syed [mailto:Syed.Muqeem@xxxxxxxxxxxx]
Sent: February 05, 2002 11:39 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Help Please!!!!
Importance: High

Hello to all Exchange Guru's
I have to restore the mail of a single user from the information
store.... my presumption .. its not possible without restoring the
entire information store... and the backup has been performed on
ArcServe without the brock level option. 
I want to restore the entire information store (If it comes to that ) on
a different machien that has entirely different hardware specs from the
actual machine. I have recreated a compleltely different active I need help as to how to proceed.. can I install exchange
on that machine with the new active directory (new domain contrller in a
physoically different network) and restore then install exchange and
then restore the information store on that machine...?? 
Please help

You are currently subscribed to this Discussion List as:
To unsubscribe send a blank email to

You are currently subscribed to this Discussion List as:
To unsubscribe send a blank email to

Other related posts: