RE: Help Please!!!!
- From: "Muqeem Syed" <Syed.Muqeem@xxxxxxxxxxxx>
- To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
- Date: Tue, 5 Feb 2002 21:38:03 +0200
Thanks guys,... I have one more question to trouble you all with...
How can I determine the organisation name, name of administrative group
and the logical databse name... the white paer says that it should be
visible when using the exchange system manager... but I think I am more
blind.... can some one please help me to find out what the name and the
other detials are...
Thanks
-----Original Message-----
From: Richard Pettigrew [mailto:Richard@xxxxxxxxxxx]
Sent: Tuesday, February 05, 2002 8:28 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Help Please!!!!
http://www.MSExchange.org/
I think your best bet here is to do the following:
1.The hardware does not have to be identical.
2.Install the OS to be identical as that of the original (easier if you
have a system state backup)
3.Install Exchange to be identical setup to the original (you must
re-create all the mailboxes again though if you did not have a system
state backup to restore)
4.Dismount the Information store
5.Restore from your backup the folders containing the information store
data.
5.Re-mount the Information store.
This is in essence what you require to do.
The instructions are not exact and the procedure may differ slightly
depending on your setup.
Hope this helps.
Further reading on the subject can be found at:
http://ftp.support.veritas.com/pub/support/products/Backup_Exec_for_Wind
owsNT/BeAdmin86_240870.pdf
This is a download pdf format documentation of Backup Exec and agents.
It outlines procedures for exchange backup and restore and may of of
some help to you.
-----Original Message-----
From: Lacaille, Michael [mailto:MLacaille@xxxxxxxx]
Sent: 05 February 2002 17:08
To: [ExchangeList]
Subject: [exchangelist] RE: Help Please!!!!
http://www.MSExchange.org/
I have not done this, but we have just recently helped another Exchange
administrator on site implement Tivoli back up for our server.
From what I understand about restoring the IS, is that it would need to
be
put on a server that is identical to the existing server. I hope that
someone else who has more experience, can assist you with this issue.
Good
luck!
-----Original Message-----
From: Muqeem Syed [mailto:Syed.Muqeem@xxxxxxxxxxxx]
Sent: Tuesday, February 05, 2002 11:39 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Help Please!!!!
Importance: High
http://www.MSExchange.org/
Hello to all Exchange Guru's
I have to restore the mail of a single user from the information
store.... my presumption .. its not possible without restoring the
entire information store... and the backup has been performed on
ArcServe without the brock level option.
I want to restore the entire information store (If it comes to that ) on
a different machien that has entirely different hardware specs from the
actual machine. I have recreated a compleltely different active
directory..now I need help as to how to proceed.. can I install exchange
on that machine with the new active directory (new domain contrller in a
physoically different network) and restore then install exchange and
then restore the information store on that machine...??
Please help
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
mlacaille@xxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
richard@xxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
syed.muqeem@xxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
