Re: [ARMini-support] Issues printing to PDF in OS10a
- From: John Harrison <john@xxxxxxxxxxxxxxxx>
- To: armini-support@xxxxxxxxxxxxx
- Date: Tue, 08 May 2018 12:55:07 +0100
In article <ea7af1f456.rcomp@xxxxxxxxxxxxxxxxxxx>,
A Rawnsley <rcomp@xxxxxxxxxxx> wrote:
IIRC this came up on the list before and it was resolved by removing (or
disabling the printing part of) !SpecialFX, at my suggestion.
..., or you need updated !Printers,
As I said previously, I solved the printing problem by updating !Printers,
but that didn't cure the odd effect where running O-Pro opens a NetSurf
window, which never happened until recently.
When I first got my ARMX6 a couple of years ago, Andrew advised me to
remove SpecialFX to solve a Draw problem, which I did, but I later put it
back because the graphics output from Eureka was so jagged without it.
That would have been at least 15 months ago (when I updated the solar
results on my website) and I've had no adverse effects since then AFIA.
So I just did an experiment by removing SpecialFX and re-booting. O-Pro
still opens a Netsurf window when I run it.
--
John Harrison
Website
http://jaharrison.me.uk
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts:
