Re: [ARMini-support] Issues printing to PDF in OS10a
- From: Chris Hughes <lists@xxxxxxxxxxxxxxx>
- To: armini-support@xxxxxxxxxxxxx
- Date: Mon, 07 May 2018 19:43:58 +0100
In message <50828bf456.jim@xxxxxxxxxxxxxxxx>
Jim Nagel <jimmini@xxxxxxxxxxxxxxxx> wrote:
Chris Hughes wrote on 7 May:
Anyone ideas on hwo I can upgrade to 10a at least and be able to print
to PDF.
My ArmX6 runs OS11 (ie, RiscOS 5.23, R-Comp edition dated 2018-02-18).
In my log I find a note to myself that I had printing problems (which
I think were with Impression rather than PrintPDF in my case) and that
they went away when I replaced !Printers 1.85 (2016) with the latest
one from Rool, which at the time was 1.89 (2018-02-28 -- downloaded as
the nightly build of Harddisc4 from the Rool site).
Printing works fine here, whether from Impression or via PrintPDF.
Using the PS3 driver, of course.
well you seem to have resolved part of the problem, I upgraded the
printing stuff from the ROOL Harddrive5.24 image and got printers 1.89,
this now works! printing via PrintPDf or PDFmaker works and generates the
PDF from Ovation Pro or easiwriter.
I do now get an error on startup using OS10a as follows:
Eroor from Print Manager
Error from class ps: Filing System path PRINTERCHOICES not present in
"squashed support.PS"
Clicking Ok clears the error and then everything works including PS/pDF
printing
I have a feeling I have sen this mentioned somewhere before.
Ideas?
--
Chris Hughes
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts:
