[argyllcms] Re: Wanted: Spyder 3 and ColorMunki Beta Testers
- From: Rick Richardson <rick.richardson@xxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Fri, 6 Mar 2009 13:14:34 -0600
So I compiled it on my Mac Mini.
$ uname -a
Darwin mac.rkkda.org 9.6.0 Darwin Kernel Version 9.6.0: Mon Nov 24
17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386 i386
$ ~/Argyll_V1.0.4_Beta/bin/chartread test
chartread: Error - Configuring USB port 'usb:/bus253/dev0 (X-Rite
ColorMunki)' to 1 failed with -9
(usb_set_configuration(SetConfiguration): device not opened for
exclusive access)
No dice there, either. But I did run a printer profile using xrite's
software on the Mac. There was a magenta hue to the CUPS grayscale
printout after I got done! Argyll I need you!!!!!
On Fri, Mar 6, 2009 at 10:53 AM, Rick Richardson <rickrich@xxxxxxxxx> wrote:
> OK...
>
> $ targen -d4 -f100 -l200 test
>
> $ ~/src/Argyll_V1.0.4_Beta/bin/printtarg -h -v -iCM -p Letter test
>
> [printed with no ICM correction]
>
> $ ~/src/Argyll_V1.0.4_Beta/bin/chartread test
> Set instrument sensor to calibration position,
> and then hit any key to continue,
> or hit Esc, ^C or Q to abort:
> Calibration complete
> About to read strip pass A
> Trigger instrument switch or any key to start, Esc, ^C or Q to give up:
>
>
> Spot read failed due to the sensor being in the wrong position
> (Sensor should be in surface position)
> About to read strip pass A
> Trigger instrument switch or any key to start, Esc, ^C or Q to give up:
> Strip read OK
> About to read strip pass B
> Trigger instrument switch or any key to start, Esc, ^C or Q to give up:
>
> Strip read failed due to communication problem.
> Hit Esc, ^C or Q to give up, any other key to retry:
>
>
> a
> error reaping URB: No such devicechartread: Error - Configuring USB
> port 'usb:/bus0/dev19 (X-Rite ColorMunki)' to 1 failed with -9 (could
> not set config 1: Bad file descriptor)
> chartread: Error - icoms_usb_read: not initialised
>
> Read A: OK
> Read B: no dice!
> - Show quoted text -
>
> On Fri, Mar 6, 2009 at 9:58 AM, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote:
>> Rick Richardson wrote:
>>>
>>> OK. I did this:
>>>
>>> $ targen -d4 -f100 test
>>> $ ~/src/Argyll_V1.0.4_Beta/bin/printtarg -a 1.4 -v -iCM -p Letter test
>>>
>>> Does test.ps look right???
>>
>> Yes, apart from the scale being non-standard. The Munki patches are already
>> huge,
>> why use -a 1.4 ? (I would expect many people to try -h for the Munki,
>> to get a few more patches on each page.)
>>
>> Graeme Gill.
>>
>>
>
>
>
> - Show quoted text -
> --
> Rick Richardson rick.richardson@xxxxxxxxxxx
> http://home.comcast.net/~rickrich1/
> Linux printer driver for HP CLJ 2600n http://foo2hp.rkkda.com/
> Linux printer driver (KM 2430 and HP 10xx) http://foo2zjs.rkkda.com/
> Linux tools for geocaching http://geo.rkkda.com/
>
--
Rick Richardson rick.richardson@xxxxxxxxxxx
http://home.comcast.net/~rickrich1/
Linux printer driver for HP CLJ 2600n http://foo2hp.rkkda.com/
Linux printer driver (KM 2430 and HP 10xx) http://foo2zjs.rkkda.com/
Linux tools for geocaching http://geo.rkkda.com/
Other related posts:
