[argyllcms] Re: Wanted: Spyder 3 and ColorMunki Beta Testers

  • From: Rick Richardson <rickrich@xxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Thu, 5 Mar 2009 16:58:29 -0600

Nevermind.  I did a "# make install", but "# make install" does not
copy the programs to /usr/bin. etc.  What is the target to install the
binaries?

On Thu, Mar 5, 2009 at 4:45 PM, Rick Richardson <rickrich@xxxxxxxxx> wrote:
> So got I the ColorMunki Photo today.  Unfortunately, it core dumps:
>
> $ spotread  -v -D5
> usb_get_paths about to look through buses:
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x1d6b, PID 0x2
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x1d6b, PID 0x1
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x1d6b, PID 0x1
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x46d, PID 0xc505
> usb_check_and_add() called with VID 0x46d, PID 0xc526
> usb_check_and_add() called with VID 0x1d6b, PID 0x1
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x971, PID 0x2007
> usb_check_and_add() called with VID 0x58f, PID 0x6362
> usb_check_and_add() called with VID 0x1390, PID 0x1
> usb_check_and_add() called with VID 0x46d, PID 0x9c1
> usb_check_and_add() called with VID 0x50d, PID 0x751
> usb_check_and_add() called with VID 0x67b, PID 0x2303
> usb_check_and_add() called with VID 0x67b, PID 0x2303
> usb_check_and_add() called with VID 0x58f, PID 0x6254
> usb_check_and_add() called with VID 0x58f, PID 0x6254
> usb_check_and_add() called with VID 0x3f0, PID 0x2b17
> usb_check_and_add() called with VID 0x1d6b, PID 0x2
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x9710, PID 0x7720
> usb_check_and_add() called with VID 0x1d6b, PID 0x1
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x1d6b, PID 0x1
> usb_get_paths about to look through devices:
> usb_check_and_add() called with VID 0x1d6b, PID 0x1
> instType: About to init Serial I/O
> instType: Trying different baud rates (20000 msec to go)
> icoms: About to set port characteristics:
>       Port = 1
>       Flow control = 1
>       Baud Rate = 7
>       Parity = 1
>       Stop bits = 1
>       Word length = 4
> icoms: About to open port '/dev/ttyS0'
> icoms: Opened port OK, fd = 3
> Segmentation fault (core dumped)
>
> $ dmesg | tail
> usb 1-5.3: new full speed USB device using ehci_hcd and address 14
> usb 1-5.3: configuration #1 chosen from 1 choice
> usb 1-5.3: New USB device found, idVendor=0971, idProduct=2007
> usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 1-5.3: Product: colormunki
> usb 1-5.3: Manufacturer: X-Rite
> spotread[2562] general protection ip:808302a sp:bff5b1c0 error:0 in
> spotread[8048000+c5000]
>
> $ lsusb
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 003: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard 
> Receiver
> Bus 006 Device 002: ID 046d:c526 Logitech, Inc.
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 014: ID 0971:2007 Gretag-Macbeth AG
> Bus 001 Device 012: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1
> Flash Card Reader/Writer (Internal/External)
> Bus 001 Device 008: ID 1390:0001 TOMTOM B.V. GO 520 T
> Bus 001 Device 007: ID 046d:09c1 Logitech, Inc. QuickCam Deluxe for Notebooks
> Bus 001 Device 009: ID 050d:0751 Belkin Components
> Bus 001 Device 011: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
> Bus 001 Device 010: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
> Bus 001 Device 006: ID 058f:6254 Alcor Micro Corp. USB Hub
> Bus 001 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
> Bus 001 Device 002: ID 03f0:2b17 Hewlett-Packard LaserJet 1020
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 005 Device 002: ID 9710:7720 MosChip Semiconductor Dual Serial Ports
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> - Show quoted text -
> $
>
>
>
>
> --
> Rick Richardson  rick.richardson@xxxxxxxxxxx
> http://home.comcast.net/~rickrich1/
> Linux printer driver for HP CLJ 2600n       http://foo2hp.rkkda.com/
> Linux printer driver (KM 2430 and HP 10xx)  http://foo2zjs.rkkda.com/
> Linux tools for geocaching                  http://geo.rkkda.com/
>



-- 
Rick Richardson  rick.richardson@xxxxxxxxxxx
http://home.comcast.net/~rickrich1/
Linux printer driver for HP CLJ 2600n       http://foo2hp.rkkda.com/
Linux printer driver (KM 2430 and HP 10xx)  http://foo2zjs.rkkda.com/
Linux tools for geocaching                  http://geo.rkkda.com/

Other related posts: