What kind of cap? What material thickness? Lettering parameters? Herb ----- Original Message ----- From: <dsklar@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Wednesday, May 24, 2006 2:59 PM Subject: [amayausers] Re: Metallic Thread >I was using Organ DBXK5 needles. At one point I slowed the machine all the >way down to 300spm. It took longer between breaks, but I don't think there >were any more stitches! > > David > Ballyhoo! > >>From: HK Acree <hkacree@xxxxxxxxxxxx> >>Date: Wed May 24 16:28:52 CDT 2006 >>To: amayausers@xxxxxxxxxxxxx >>Subject: [amayausers] Re: Metallic Thread > >>I have run metallic on caps very well. Use both Madeira and Arc. Densities >>need to be increased as the thread covers more area than 40 wt. Slow the >>machine down. I ran mine at 700 (Non-XT) No issues in 45,000 stitches. >> >>Herb >>Royal Embroidery >>----- Original Message ----- >>From: "Shuffletown Embroidery" <shuffemb@xxxxxxxxxxxxx> >>To: <amayausers@xxxxxxxxxxxxx> >>Sent: Wednesday, May 24, 2006 2:10 PM >>Subject: [amayausers] Re: Metallic Thread >> >> >>>I use Organ needles all the time, but this metallic-thread needle from >>> Madeira, also a DBXK5, worked beautifully. If there is a metallic-thread >>> version of the Organ needle, I am not familiar with it. >>> Mary >>> >>> Mary Buckle >>> Shuffletown Embroidery >>> Charlotte, NC >>> 704-398-1273 >>> >>> >>> -----Original Message----- >>> From: amayausers-bounce@xxxxxxxxxxxxx >>> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Rod or Sharon >>> Sent: Wednesday, May 24, 2006 4:56 PM >>> To: amayausers@xxxxxxxxxxxxx >>> Subject: [amayausers] Re: Metallic Thread >>> >>> The Amaya was designed to use Organ needles and preferably the DBXK5. >>> It >>> also has a larger eye. >>> You will need to slow down your sewing speed to 1000 or under to stitch >>> with >>> >>> metallic threads. For caps use a sharp needle. >>> Sharon >>> ----- Original Message ----- >>> From: "Shuffletown Embroidery" <shuffemb@xxxxxxxxxxxxx> >>> To: <amayausers@xxxxxxxxxxxxx> >>> Sent: Wednesday, May 24, 2006 2:34 PM >>> Subject: [amayausers] Re: Metallic Thread >>> >>> >>>> David, >>>> I haven't done hats, so I am certainly not an expert, but I have had >>>> excellent results using a metallic needle from Madeira. The eye is >>>> bigger >>>> than the regular embroidery needles. Maybe the polos, tees and sweats >>>> are >>>> more forgiving than the caps, so the needle could be the solution. >>>> Mary >>>> >>>> Mary Buckle >>>> Shuffletown Embroidery >>>> Charlotte, NC >>>> 704-398-1273 >>>> >>>> >>>> -----Original Message----- >>>> From: amayausers-bounce@xxxxxxxxxxxxx >>>> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of >>>> dsklar@xxxxxxxxxxx >>>> Sent: Wednesday, May 24, 2006 11:26 AM >>>> To: amayausers@xxxxxxxxxxxxx >>>> Subject: [amayausers] Metallic Thread >>>> >>>> I recently had a job with 8 caps (unstructured), polos, tees, and >>>> sweats. >>>> All used the same logo. Parts of the logo were stitched using metallic >>>> thread. Everything went fine except for the hats. It took several >>>> hours >>>> to >>>> get the hats done. There was a thread break every few rows. It seemed >>>> to >>>> make no difference whether it was stitching the underlay (density >>>> irrelevent) or the actual fill. The polos, tees sweats sewed without >>>> problem using a 75/11BP. For the unstructured caps I used two layers >>>> of >>>> medium tearaway backing. I started with a 75/11 sharp went up to 80/12 >>>> sharp (don't have bigger), changed needles (to new ones and location on >>>> the >>>> machine), but could not make any difference. The problem area is not >>>> on >>>> or >>>> near a seam. I played with the material thickness as well. The cap >>>> was >>>> on >>>> a WACF. I have done plenty of caps. I have done some metallic before. >>>> But >>>> this is the first metallic on caps. Any thoughts on what the problem >>>> was? >>>> Thanks. >>>> >>>> David Sklar >>>> Ballyhoo! >>>> Arlington, VA >>>> >>>> =========================================================== >>>> >>>> The AmayaUsers Mailing List >>>> Website: http://www.amayausers.com >>>> Discussion Board: http://www.amayausers.com/boards >>>> Subscribe/Unsubscribe: http://www.amayausers.com/list >>>> >>>> =========================================================== >>>> >>>> >>>> =========================================================== >>>> >>>> The AmayaUsers Mailing List >>>> Website: http://www.amayausers.com >>>> Discussion Board: http://www.amayausers.com/boards >>>> Subscribe/Unsubscribe: http://www.amayausers.com/list >>>> >>>> =========================================================== >>> >>> =========================================================== >>> >>> The AmayaUsers Mailing List >>> Website: http://www.amayausers.com >>> Discussion Board: http://www.amayausers.com/boards >>> Subscribe/Unsubscribe: http://www.amayausers.com/list >>> >>> =========================================================== >>> >>> >>> =========================================================== >>> >>> The AmayaUsers Mailing List >>> Website: http://www.amayausers.com >>> Discussion Board: http://www.amayausers.com/boards >>> Subscribe/Unsubscribe: http://www.amayausers.com/list >>> >>> =========================================================== >> >>=========================================================== >> >>The AmayaUsers Mailing List >>Website: http://www.amayausers.com >>Discussion Board: http://www.amayausers.com/boards >>Subscribe/Unsubscribe: http://www.amayausers.com/list >> >>=========================================================== > > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================