[amayausers] Re: Marks on Ballcap bills
- From: Mike Garber <agraphic2@xxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 12 May 2006 11:46:42 -0700
beanies sounds kind of whimpy compared to toque....
Ram Printing and Promotions Inc wrote:
>canadian winter head garment traditionally knit or fleece. I think you guys
>down south call them beanies?
>
>Dana @
>Ram Printing & Promotions Inc.
>(780) 875-5073
>www.ramprinting.net
>
>----- Original Message -----
>From: Mike Garber <agraphic2@xxxxxxxxxxxx>
>Date: Friday, May 12, 2006 12:39 pm
>Subject: [amayausers] Re: Marks on Ballcap bills
>
>
>
>>Dana,
>>What's a toque?
>>
>>Mike
>>
>>Ram Printing and Promotions Inc wrote:
>>
>>
>>
>>>cut the top off a small toque and then pop over the top of the
>>>
>>>
>>bill prior to embroidery. This rubs on the toque and not the frame
>>
>>
>>>Dana @
>>>Ram Printing & Promotions Inc.
>>>(780) 875-5073
>>>www.ramprinting.net
>>>
>>>----- Original Message -----
>>>From: Tracy Neighbors <EnchantThreads@xxxxxxx>
>>>Date: Friday, May 12, 2006 8:03 am
>>>Subject: [amayausers] Re: Marks on Ballcap bills
>>>
>>>
>>>
>>>
>>>
>>>>-----Original Message-----
>>>>From: amayausers-bounce@xxxxxxxxxxxxx
>>>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Laughing
>>>>
>>>>
>>Palm
>>
>>
>>
>>>Inc.Sent: Friday, May 12, 2006 7:56 AM
>>>
>>>
>>>>To: amayausers@xxxxxxxxxxxxx
>>>>Subject: [amayausers] Marks on Ballcap bills
>>>>
>>>>I am curious if others are experiencing the same issue I'm coming
>>>>acrosswith ballcaps...
>>>>
>>>>When I use one of the cap frames (doesn't matter if it's the wide
>>>>angle or
>>>>standard frame), the back side of the needle case frame rubs
>>>>against the
>>>>center of the cap bills and produces a subtle, but noticeable,
>>>>horizontalmark. Since I tend to
>>>>
>>>>
>>>>
>>>>
>>>avoid doing ballcaps, this isn't a
>>>
>>>
>>>
>>>
>>>>major issue for
>>>>me, but I'd like to know if this is a normal, or is there some
>>>>
>>>>
>>kind of
>>
>>
>>>>adjustment I can make to avoid having that metal bar rub against
>>>>the ballcap
>>>>bills. I tried putting some material between the bill and the
>>>>
>>>>
>>bar,
>>
>>
>>>>but it
>>>>didn't help very much.
>>>>
>>>>Any suggestions?
>>>>
>>>>Jim Sulsona
>>>>Laughing Palm, Inc.
>>>>Custom Embroidered & Screen Printed Products Post O
>>>>
>>>>
>ffice Box
>
>
>>957073
>>
>>
>>>>Duluth,GA 30095-9518 USA Toll Free: 1-877-4EMBROIDERY
>>>>Tel: 770-448-1171
>>>>Fax: 770-417-1457
>>>>sales@xxxxxxxxxxxxxxxx
>>>>www.laughingpalm.com <http://www.laughingpalm.com/>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
Other related posts:
