[amayausers] Re: Bobbin Tension ??
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Sat, 12 Nov 2005 10:04:47 -0800
Tom,
When you save to .dst it will prompt you to put in a number for jumps per
trim. Put in 1. 3 is standard and 1 would make it trim in closer spaces.
Not sure it will be enough but thats the only thing I can think of. Might
try to save as an .exp to see if its any better.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR
----- Original Message -----
From: "Tom McCloud" <mccloud12@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Saturday, November 12, 2005 9:07 AM
Subject: [amayausers] Re: Bobbin Tension ??
To All,
I'm working with Melco Block CP font to create a
design.
I input to trim if "greater than .0125", so the machine
trims
between each letter, which is what I want.
When I convert my OFM file to a DST file I lose all my
trims
between each letter.
How do I get my trims back between all letters when
saving to a
DST format?
Thx,
Tom
Other related posts:
