Yeah Sharon, I have been through the training program. Sorry, I,ve just
always been told there's no such thing as a dumb question. Debbie
----- Original Message -----
From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, October 21, 2005 3:40 PM
Subject: [amayausers] Re: Bobbin Tension ??
Debbie,
Have you had the opportunity to go for training yet? They are very
thorough and go through all these things--well worth the time.
Sharon
----- Original Message ----- From: "r.rinehartsr" <drader@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, October 21, 2005 12:49 PM
Subject: [amayausers] Re: Bobbin Tension ??
> Herb, I don't mean to sound like a real moron here, but when you say
"if it
> is loose, I take some away", do you mean you lower the MT. I assume
that's
> what you mean, but I always get myself into trouble when I do that.
THanks
> for so much help and information you have provided. I have only had my
> machine one month and have learned a LOT from reading all the mail. I
> didn't realize that you could test the bobbin tension until someone
wrote
> about the drop test. I did it and couldn't believe that it fell QUICKLY
to
> the floor. So, I tightened the bobbin up a bit. I also couldn't
believe it
> was sent to me like that. But, thanks again for everything!!!!!! Debbie
in
> Indiana
> ----- Original Message ----- > From: "HK Acree" <hkacree@xxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Friday, October 21, 2005 9:36 AM
> Subject: [amayausers] Re: Bobbin Tension ??
>
>
>> Sometimes I get the MT off a bit and create my own issues. When I start
to
>> sew I will look at the underlay as it begins, there are good clues
there.
>> If it is sinking in or looks tight I will give it a bit more. If it is
>> loose looking I take some away. So much to learn. Today is Friday and
it
>> seams like it is the day when the gremlins come out. Hope they go
>> elsewhere.
>>
>> Herb
>> ----- Original Message ----- >> From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Friday, October 21, 2005 5:40 AM
>> Subject: [amayausers] Re: Bobbin Tension ??
>>
>>
>>> Thank you Herb - that's just the info I was looking for. Sometimes
>>> things
>>> go relative well other times not so good like last night. Spent
nearly 2
>>> hours getting a 21,000 stitch name (2" tall) to sew on fleece. Have
done
>>> this enough times to think I know what I'm suppose to be doing but
>>> constantly was getting fraying thread breaks. MT, bobbin, roller, new
>>> needle
>>> changes etc did not seem to matter! It is a balancing act and I fell
>>> .....
>>>
>>> Terri
>>>
>>>
>>>
>>
>>
>
>
