Hello,
Well, through bluetooth, it won't work. The bluetooth hardware is simply too
old for IOS. If it will work, it will only work through accessibility.
----- Original Message -----
From: Ian Macrae <ian.macrae@xxxxxxxxxxxxxxxxxxxx>
To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
Date: Friday, December 4, 2015 3:02 pm
Subject: [access-uk] Re: using a braille display with a pc
Dunno, but I'll try again with both over the weekend.
On 4 Dec 2015, at 14:58, Rajmund <brajmund2000@xxxxxxxxx> wrote:
Hello,
What method did you use? Through accessibility, or through bluetooth?
----- Original Message -----
From: Ian Macrae <ian.macrae@xxxxxxxxxxxxxxxxxxxx>
To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
Date: Friday, December 4, 2015 1:46 pm
Subject: [access-uk] Re: using a braille display with a pc
I recently had need to try connecting my Braille Edge to my iPad Mini 2
and received the message, Braille Edge not supported. Can this really be
the case?
On 4 Dec 2015, at 13:34, Jackie Brown <jackieannbrown62@xxxxxxxxx> wrote:
Hi Pele
I have followed your steps below before, but can't get my PC to recognise
it. As I have already said, it isn't major because I tend to use pens or
SD
cards for copying stuff across. Sometimes it is more hassle than it is
worth to complain. It is incredible how many times I hear: "I've never
seen
this issue before," or "We haven't had others say this is happening." I
just don't buy that, but what do I know? (smile.)
Kind Regards,
Jackie Brown
Emails: thebrownsplace@xxxxxxxxxxxxxx
jackieannbrown62@xxxxxxxxx
jackie@xxxxxxxxxxxxxxxxxxx
Check out my website: www.thebrownsplace.info
Read my EyeWrite blog: www.thebrownsplace.info/page_id=136
Follow me on Twitter: @thebrownsplace
Skype: thejackmate
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of
Pele West
Sent: 04 December 2015 08:57
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: using a braille display with a pc
Hi Jackie
As you know I have just bought a Braille Sense U2 QWERTY. One of the first
things I did was connect it to the PC, and it worked fine.
To do this:
1. Turn Mass Storage On in the Global Options Menu
2. Plug the cable into the small USB port on the Braille Sense (not the
big
one).
3. I then got messages about drivers being installed, and then it
connected.
Actually the first time I tried I had not turned Mass Storage on so it
connected using (is it called) PC Mobile? But I did not bother with that.
I have not connected this one as a terminal yet, although my previous
Braille Sense QWERTY worked perfectly once I had installed the Window-Eyes
drivers.
Pele
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxxsubject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxxsubject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxxsubject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxxsubject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxxsubject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxxsubject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Sent from a Braille Sense
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx"subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx"subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq