[access-uk] Re: using a braille display with a pc

  • From: "Jackie Brown" <jackieannbrown62@xxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 4 Dec 2015 13:57:05 -0000

I will try that and see what happens, my U2 Mini seems ok with iOS 9.1.

Kind Regards,

Jackie Brown
Emails: thebrownsplace@xxxxxxxxxxxxxx
jackieannbrown62@xxxxxxxxx
jackie@xxxxxxxxxxxxxxxxxxx
Check out my website: www.thebrownsplace.info
Read my EyeWrite blog: www.thebrownsplace.info/?page_id=136
Follow me on Twitter: @thebrownsplace
Skype: thejackmate


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ian Macrae
Sent: 04 December 2015 13:46
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: using a braille display with a pc

I recently had need to try connecting my Braille Edge to my iPad Mini 2 and
received the message, Braille Edge not supported. Can this really be the
case?

On 4 Dec 2015, at 13:34, Jackie Brown <jackieannbrown62@xxxxxxxxx> wrote:

Hi Pele

I have followed your steps below before, but can't get my PC to
recognise it. As I have already said, it isn't major because I tend
to use pens or SD cards for copying stuff across. Sometimes it is
more hassle than it is worth to complain. It is incredible how many
times I hear: "I've never seen this issue before," or "We haven't had
others say this is happening." I just don't buy that, but what do I
know? (smile.)

Kind Regards,

Jackie Brown
Emails: thebrownsplace@xxxxxxxxxxxxxx
jackieannbrown62@xxxxxxxxx
jackie@xxxxxxxxxxxxxxxxxxx
Check out my website: www.thebrownsplace.info Read my EyeWrite blog:
www.thebrownsplace.info/?page_id=136
Follow me on Twitter: @thebrownsplace
Skype: thejackmate

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf Of Pele West
Sent: 04 December 2015 08:57
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: using a braille display with a pc

Hi Jackie

As you know I have just bought a Braille Sense U2 QWERTY. One of the
first things I did was connect it to the PC, and it worked fine.

To do this:

1. Turn Mass Storage On in the Global Options Menu

2. Plug the cable into the small USB port on the Braille Sense (not
the big one).

3. I then got messages about drivers being installed, and then it
connected.

Actually the first time I tried I had not turned Mass Storage on so it
connected using (is it called) PC Mobile? But I did not bother with that.

I have not connected this one as a terminal yet, although my previous
Braille Sense QWERTY worked perfectly once I had installed the
Window-Eyes drivers.

Pele
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: