Peter, thanks I'll try it.
-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Torpey
Sent: Thursday, August 04, 2016 11:14 AM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Accessible Disk burning and CD copying
software
If you want to get out extraneous background noise try using the Noise
Reduction effect in Audacity. Audacity is free and works well with screen
readers.
--Pete
-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Larry
Sent: Thursday, August 4, 2016 11:00 AM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Accessible Disk burning and CD copying
software
Hey guys,
It's better. Thanks for the tip to "Normalize". That helped a lot.
Mary, not sure where to find the setting to change volume on input devices
in Studio Recorder.
The sample rate for my Wave format is set at 44100, is that where it should
be?
Also is there a way to reduce the background surface noise?
Larry
sa-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Mary Emerson
(Redacted sender "maryemerson" for DMARC)
Sent: Thursday, August 04, 2016 9:07 AM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Re: Accessible Disk burning and CD copying
software
Larry,
Have you gone into Studio Recorder's menus and adjusted the options?
Select wave devices might have some helpfuyl options. Have you adjusted the
input device's volume when recording?
In Windows 7, when you open the mixer in the system tray, are all the
percentages at 100 percent, including the sound card, system sounds, and the
microphone volume?
Mary
