I generally lay a towel or cotton blanket (no polyester or satin or other static creating fabric) on the kitchen table or counter to work on the insides. Don ----- Original Message ----- From: "GMan" <gman.pctt@xxxxxxxxx> To: <pctechtalk@xxxxxxxxxxxxx> Sent: Sunday, May 06, 2007 12:00 PM Subject: -=PCTechTalk=- Re: question about "My Way" program > Cristy, > There may be a latch located on the back of the case that releases the > cover. It would most likely be right up against the side of the case that > opens (left or right, depending), somewhere near the middle (height) of > the > tower. If you're able to get in and assuming you conduct this transfer on > the floor, place the old drive on a clean wash cloth on top of a small > cardboard box or other non-conducting object to keep it at least 2 inches > above the floor. This will help isolate the old drive from any static > that > may reside in the floor diring the data transfer. :O) -- Please remember to trim your replies (including this sentence and everything below it) and adjust the subject line as necessary. To unsubscribe or change your email settings: //www.freelists.org/webpage/pctechtalk To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/