[modeleng] Re: Injectors - asking the question again
- From: "alanjstepney" <alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Thu, 9 Dec 2004 01:47:05 -0000
Should be OK.
alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
www.alanstepney.info
Model Engineering, Steam Engine, and Railway technical pages.
----- Original Message -----
From: "Peter Sheppard" <peter.sheppard@xxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, December 08, 2004 9:35 PM
Subject: [modeleng] Re: Injectors - asking the question again
> G'day
>
> As this got hi-jacked by another thread (hot water versus cold water) and
> Tim dribbling all over the track, I will ask the question again.
>
> Will having the injector inclined at an angle in the vertical plane
> (pitch) have any effect on its operation?
>
> Cheers
>
> Peter
>
> --------------------------------------------------------------------
> Peter Sheppard BSc (Hons) CEng FIEE FIRSE FSaRS
> Principal Consultant
> Lloyd's Register Rail Limited
> 5th Floor, 37-39 Corn Street
> Bristol BS1 1HT
>
> T: 0117 929 4443
> F: 0117 929 4554
> M: 07760 167 617
> E: peter.sheppard@xxxxxxxxxx
> --------------------------------------------------------------------
>
>
> -----Original Message-----
> From: Peter Sheppard [SMTP:peter.sheppard@xxxxxxxxxx]
> Sent: Thursday, December 02, 2004 11:51 AM
> To: 'modeleng@xxxxxxxxxxxxx'
> Subject: [modeleng] Injectors
>
> A quick question before I pop "down under" to meet Tel in person!
>
> I have fitted two injectors to my Elidir. Due to the intricacies of
> plumbing (and the proximity of the handbrake mechanism), whilst the
> injector is horizontal, it is inclined at an angle in the vertical plane
> (if that makes sense).
>
> Do you reckon that this will affect the operation? (All I can think of is
> that it may affect the seating of the ball).
>
> Cheers
>
> Peter
>
>
>
> --------------------------------------------------------------------
> Peter Sheppard BSc (Hons) CEng FIEE FIRSE FSaRS
> Principal Consultant
> Lloyd's Register Rail Limited
> 5th Floor, 37-39 Corn Street
> Bristol BS1 1HT
>
> T: 0117 929 4443
> F: 0117 929 4554
> M: 07760 167 617
> E: peter.sheppard@xxxxxxxxxx
> --------------------------------------------------------------------
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
