We are using Ghost 9.0 to create images on an external USB hard drive. We imaged an Operator Spare Workstation on-line, then deleted the operating system and parts of the Foxboro partition. We restored the hard drive from the image. It works OK. This Workstation had an USB 2.0 port and the image was created very quickly (less than 10 minutes). However, an image of an AW, which has a USB 1.1 port, took approximately 3.5 hours to image (on-line). We did not see any slowdown of trending on the operator workstations hosted by the AW(AIM host). Configuration was also done while imaging the AW. Yo Dickerson DCS Technician Phone: (409) 723-3518 Pager: (409) 723-3800-1333 e-mail: yolanda_dickerson@xxxxxxxxxxxx Brian Bates <batesb@xxxxxxxxx To: <foxboro@xxxxxxxxxxxxx> om> cc: Sent by: Subject: [foxboro] P92 (Dell) HDD Backups foxboro-bounce@fr eelists.org 04/27/2006 11:58 AM Please respond to foxboro Hi all. How do you backup your Foxboro/Dell workstations? Is anybody using Ghost to create images on CD, DVD, second HDD or to a network server? Has anybody installed a SCSI or FireWire PCI card, and used an external tape drive? Or installed an internal Tape Drive? -Regards, Brian Bates. ------------------------------------------------------------------------------ Confidentiality Message This e-mail message is confidential and is intended for the exclusive use of the addressee. Any other person is strictly prohibited from disclosing, distributing or reproducing it. If the addressee cannot be reached or is unknown to you, please inform the sender by return e-mail immediately and delete this e-mail message and destroy all copies. Thank you. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave