[blindreplay] Re: has anyone made timed recording using TV software?
- From: <petrakigianos-giasou@xxxxxxxxx>
- To: blindreplay@xxxxxxxxxxxxx
- Date: Mon, 10 Dec 2007 07:01:28 -0800 (PST)
I would call your local cable tv company on this. I believe that
analog basic tv subscription you have should still work past
Feb. 2009 but please call your cable company.
If you decide to move to the digital system you may want to buy
an inexpensive remoe control to replace the digital remote
control you say isn't too good to use. Have that inexpensive
remote ready for the technician to setup for you when they visit
and do the new installation. It's up to you. Just giving you
some ideas.
--- Joanne <houseofmusic3345@xxxxxxxxxxx> wrote:
> But Petro--and I know this is a bit off-topic but need to ask
> real
> quick--right now I don't have digital cable, just basic. The
> remotes they
> give you for digital around here are bad so I just have basic
> and set TV to
> channel 3 to set a VCR recording. In 2009 when it all goes
> digital, how
> will we then be able to use our VCR's? Just wondering because
> some of my
> friends and I are afraid we won't be able to at all. So going
> back to our
> group's topic, which is Replay AV, would love to see Lesley
> and others at
> the company perhaps consider developing even more TV-recording
> features in
> case recording from our PC's might end up being the only way
> we can still
> tape our shows when it all switches over.
> ----- Original Message -----
> From: <petrakigianos-giasou@xxxxxxxxx>
> To: <blindreplay@xxxxxxxxxxxxx>
> Sent: Monday, December 10, 2007 7:36 AM
> Subject: [blindreplay] Re: has anyone made timed recording
> using TV
> software?
>
>
> > Thank you. The ATI recording software can be used version
> number
> > was like 2.8 - 2.9+ because I tried it for awhile here. In
> one
> > step you have to turn on and off your num lock key to do a
> > particular task.
> >
> > I know in Feb. 2009 everything will go digital in the USA
> with
> > our tv system. Right now its NTSC and is going to be ATSC.
> The
> > analog signal will disappear in Feb. 2009.
> >
> > The video cassette recorder should still work and record
> those
> > digital signals. If you have satellite or cable tv you
> already
> > have digital signal.
> >
> >
> > --- Joanne <houseofmusic3345@xxxxxxxxxxx> wrote:
> >
> >> Petro, the Winamp plug-in is called TV Wonder Pro. Someone
> on
> >> PC-audio
> >> group told me about it because I couldn't get the channels
> to
> >> come in with
> >> ATI. You of course need a TV card, but when you install TV
> >> Wonder Pro you
> >> can get it to search and find your local provider's
> channels
> >> and you can
> >> even put your favorites as desktop shortcuts if you want.
> By
> >> default it
> >> puts the folder for TV channels in my documents, but yes
> it's
> >> a free
> >> plug-in. But the add-ons that go with ATI are, I think,
> very
> >> user-unfriendly so may listen to Rick's podcasts. Was
> really
> >> hoping I could
> >> use Replay to set timed TV recordings for many reasons, not
> >> the least of
> >> which is that in 2 years none of us will be able to record
> off
> >> the TV
> >> because our talking VCR's will be obsolete.
> >> ----- Original Message -----
> >> From: <petrakigianos-giasou@xxxxxxxxx>
> >> To: <blindreplay@xxxxxxxxxxxxx>
> >> Sent: Monday, December 10, 2007 7:12 AM
> >> Subject: [blindreplay] Re: has anyone made timed recording
> >> using TV
> >> software?
> >>
> >>
> >> > Hi
> >> > I could not get the tv part to work here. You may have
> >> better
> >> > results though. I was told to not run the ATI software
> when
> >> > using Replay AV 8 to do tv recordings. Try it without the
> >> ATI
> >> > software and see what happens.
> >> >
> >> > At blindcooltech.com Rick Harmon has done 1 or 2 podcasts
> >> (mp3s)
> >> > on using ATI's software to record tv. You may want to
> listen
> >> to
> >> > these. Check year 2006.
> >> >
> >> > Can you tell me the name of this Winamp plugin and did
> you
> >> find
> >> > it on the Winamp site? Is it fully accessible. Tell me
> more
> >> > please if you can on the plugin.
> >> >
> >> > --- Joanne <houseofmusic3345@xxxxxxxxxxx> wrote:
> >> >
> >> >> Maybe not exactly the right wording on subject line, but
> I
> >> >> thought that in Replay 8 one could set a recording in
> the
> >> >> scheduler and it would actually record a TV station at
> >> >> scheduled time if you have, say, ATI or other software.
> I
> >> >> thought there was a way where you could tell it what
> >> channel,
> >> >> from your own individual group of cable or satellite
> >> stations
> >> >> that you can get on your PC, to record and this way you
> >> >> wouldn't miss TV shows while away, etc. I'm having a
> hard
> >> >> time finding how to do this, and when I went to the part
> >> about
> >> >> TV card it said it didn't see one. But I do have an ATI
> >> and I
> >> >> do have all my channels in Winamp as well, thanks to the
> >> >> Winamp TV plug-in. Can someone tell me how to get it to
> >> >> record a TV show? Thanks.
> >> >
> >> > --
> >> > To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx
> >> with unsubscribe
> >> > in subject
> >> > To contact list owner: e-mail
> >> blindreplay-admins@xxxxxxxxxxxxx
> >> >
> >>
> >>
> >> --
> >> To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx
> with
> >> unsubscribe in subject
> >> To contact list owner: e-mail
> blindreplay-admins@xxxxxxxxxxxxx
> >>
> >
> > --
> > To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx
> with unsubscribe
> > in subject
> > To contact list owner: e-mail
> blindreplay-admins@xxxxxxxxxxxxx
> >
>
>
> --
> To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with
> unsubscribe in subject
> To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx
>
--
To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in
subject
To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx
Other related posts:
