[argyllcms] Re: EyeOne Rev B. doesn't walk
- From: "Marco N." <manold@xxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Wed, 20 Aug 2008 00:24:53 +0200
Il giorno 19/ago/08, alle ore 18:46, Klaus Karcher ha scritto:
Graeme Gill wrote:
Maybe someone else who runs Eye One Match on a Mac can comment on
whether Argyll can see their instrument ?
Of course only one application / driver can access the instrument at
the same time. As long as e.g. eye-one match runs and uses the
instrument, argyll or any other application has no access to the
instrument.
There were some issues with old Gretag drivers that didn't release
the instrument after quiting, but with up-to-date drivers this
should be no problem.
Even with these old drivers, the instrument should work with argyll
immediately after reboot (before any other application tried to
access the Instrument).
Yes, this is the behavior: immediately after reboot "spotread -?"
tells: 1 = 'usb:/bus93/dev0 (GretagMacbeth i1 Pro)'
after a while: ** No ports found **
Before I have delete the application dir and reinstall the last
version of Match (3.6.2).
?!?
Marco
Other related posts:
