[argyllcms] Re: EyeOne Rev B. doesn't walk

Marco N. wrote:
After startup the instrument is visible for approximately 60 seconds, Spotread sees it into this timing regardless of how many times it runs. 

OK. I'd be surprised if this was specific to just the instruments, it
sounds like the whole libusb/OS X USB interface has got a problem
in enumerating devices.
Today I have tried to install a fresh copy of Tiger: the first 60 seconds after reboot all right, after this time the command "spotread -?" stop on "-c listno Set communication port from the following list (default 1)" for *8-9 minuts* but the command ends successfully and the spectro is present. 

I've put an OS X Intel version of spotread at
<http://www.argyllcms.com/spotread_diag_osxi.tgz>,
and I've added a bit more debugging to the USB device
enumeration when -D is used. What is the "spotread -D -?" output
straight after system boot, and what is the output like
after it start misbehaving ?

Graeme Gill.

Other related posts: