[argyllcms] Re: EyeOne Rev B. doesn't walk
- From: "Marco N." <manold@xxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 25 Aug 2008 10:11:09 +0200
I've put an OS X Intel version of spotread at
<http://www.argyllcms.com/spotread_diag_osxi.tgz>,
and I've added a bit more debugging to the USB device
enumeration when -D is used. What is the "spotread -D -?" output
straight after system boot, and what is the output like
after it start misbehaving ?
Graeme Gill.
I send the terminal output txt
Ciao
Marco
Last login: Mon Aug 25 10:03:04 on console
imac-di-marco-noldin:~ Marco$ /Users/Marco/Downloads/spotread -D -?
Read Print Spot values, Version 1.0.3
Author: Graeme W. Gill, licensed under the GPL Version 3
usage: spotread [-options] [logfile]
-v Verbose mode
-s Print spectrum for each reading
-S Plot spectrum for each reading
-c listno Set communication port from the following list (default 1)
usb_get_paths about to look through buses:
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x1003
usb_check_and_add() called with VID 0x5ac, PID 0x20c
usb_check_and_add() called with VID 0x5ac, PID 0x304
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x971, PID 0x2000
usb_check_and_add() found known instrument
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8006
usb_check_and_add() called with VID 0xaec, PID 0x3260
usb_check_and_add() called with VID 0xaec, PID 0x3260
1 = 'usb:/bus61/dev0 (GretagMacbeth i1 Pro)'
icoms: delete called
-t Use transmission measurement mode
-d Use display measurement mode (absolute results)
-db Use display white brightness relative measurement mode
-dw Use display white relative measurement mode
-e Use emissive measurement mode (absolute results)
-a Use ambient measurement mode (absolute results)
-y c|l Display type (if emissive), c = CRT, l = LCD
-i illum Choose illuminant for print/transparency spectral data:
A, D50 (def.), D65, F5, F8, F10 or file.sp
-o observ Choose CIE Observer for spectral data:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
(Choose FWA during operation)
-f filter Set filter configuration (if aplicable):
n None
p Polarising filter
6 D65
u U.V. Cut
-F extrafilterfile Apply extra filter compensation file
-x Display Yxy instead of Lab
-T Display correlated color temperatures
-N Disable auto calibration of instrument
-H Start in high resolution spectrum mode (if available)
-W n|h|x Ovride serial port flow control: n = none, h = HW, x =
Xon/Xoff
-D [level] Print debug diagnostics to stderr
logfile Optional file to save reading results as text
imac-di-marco-noldin:~ Marco$ /Users/Marco/Downloads/spotread -D -?
Read Print Spot values, Version 1.0.3
Author: Graeme W. Gill, licensed under the GPL Version 3
usage: spotread [-options] [logfile]
-v Verbose mode
-s Print spectrum for each reading
-S Plot spectrum for each reading
-c listno Set communication port from the following list (default 1)
usb_get_paths about to look through buses:
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x1003
usb_check_and_add() called with VID 0x5ac, PID 0x20c
** No ports found **
icoms: delete called
-t Use transmission measurement mode
-d Use display measurement mode (absolute results)
-db Use display white brightness relative measurement mode
-dw Use display white relative measurement mode
-e Use emissive measurement mode (absolute results)
-a Use ambient measurement mode (absolute results)
-y c|l Display type (if emissive), c = CRT, l = LCD
-i illum Choose illuminant for print/transparency spectral data:
A, D50 (def.), D65, F5, F8, F10 or file.sp
-o observ Choose CIE Observer for spectral data:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
(Choose FWA during operation)
-f filter Set filter configuration (if aplicable):
n None
p Polarising filter
6 D65
u U.V. Cut
-F extrafilterfile Apply extra filter compensation file
-x Display Yxy instead of Lab
-T Display correlated color temperatures
-N Disable auto calibration of instrument
-H Start in high resolution spectrum mode (if available)
-W n|h|x Ovride serial port flow control: n = none, h = HW, x =
Xon/Xoff
-D [level] Print debug diagnostics to stderr
logfile Optional file to save reading results as text
imac-di-marco-noldin:~ Marco$
Other related posts:
